SPIDER-MAN - FILAMENT PAINTING

Copyright Claim

SPIDER-MAN - FILAMENT PAINTING

Boost
50
105
18

Print Profile(2)

All
P1S
P1P
X1
X1 Carbon
X1E
A1

1 AMS
1 AMS
Designer
7.1 h
1 plate
4.9(14)

NO AMS - MANUAL FILAMENT SWAPS
NO AMS - MANUAL FILAMENT SWAPS
Designer
7 h
1 plate

Boost
50
105
18
0
131
69
Released

Description

IMPORTANT: READ BEFORE PRINTING

 

There are two 3MF files. First one is for people with an AMS. Just load the filaments as below and go.

The second profile is for people with NO AMS. The pauses are set at the correct layers so all you have to do is load the black to start then at each pause unload and load the correct filaments in order as below and hit resume. Repeat until complete.

Avoid other print profiles that try to save time by using a thicker layer height. This layer height is necessary to blend the colors. I have already added a layer height modifier to the black to print 0.16 layer height for the non-blended portions to speed up the print without sacrificing quality.

 

This is a filament painting of your friendly neighborhood Spider-Man, as a companion piece to this VENOM. Like all of my models this is for personal use only. If you would like to hang this here is my frame which fits it perfectly. The photo attached is the printed model and frame.

 

Like all Hueforge prints this model produces very little waste (4 poops total).

Some of my other prints have more notes and tips for first time Hueforge printers.

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm (Layer height modifier can be added manually if you are using the STL (0.00 to 0.64mm @0.16 layer height to shave off about a half hour of print time. It is already done in the 3MF files attached)

 

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3.1
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA BambuLab Basic Jade White Transmission Distance: 5

 

Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Blue Gray
At layer #18 (1.52mm) swap to Silver
At layer #23 (1.92mm) swap to Jade White for the rest.

 

If you print this model please like and post your makes with ratings. Happy Printing!

 

Comment & Rating (18)

Please fill in your opinion
(0/5000)

Print Profile
1 AMS
Amazing
The designer has replied
1
Reply
these color subs turned out pretty cool
(Edited)
1
Reply
Print Profile
1 AMS
a little bit to thick. I am absolutely thrilled with my 3D-printed black-and-white image from Hueforge! The accuracy of the details and the depth of the shading are extraordinary and demonstrate the impressive precision of 3D printing technology. Thanks.
1
Reply
Print Profile
1 AMS
changed the colors to black, red, blue, white. came out perfectly ❤️
1
Reply
Print Profile
1 AMS
Changed the filament color, but great end result!
1
Reply
awesome print!
0
Reply
Print Profile
1 AMS
Turned out great, thank you
The designer has replied
2
Reply
Thanks for reviewing fellow canuck!
(Edited)
1
Reply
I added In red.
0
Reply
Print Profile
1 AMS
2
Reply
Print Profile
1 AMS
2
Reply
Print Profile
1 AMS
2
Reply
Print Profile
1 AMS
2
Reply

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.