Dead Pool woods Scene Wall Art Hue Forge by JJ_3D

JJ_3D

Art>2D Art

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.08mm layer, 1 walls, 100% infill

Designer

3.5 h

1 plate

Open in Bambu Studio

Boost

Released

Description

Dead Pool woods scene from the Deadpool and Wolverine movie. Remember when printing do not adjust the z axis if you are planning on scaling up. Custom request are welcome, request away and ill add to my profile.

Project: DEADPOOL BACK.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x436.21mm in size
You may print at higher layer heights below the Min Depth of 0.56mm
The Max Depth is 2.4mm and the Actual Depth is 2.4mm

Filaments Used:
    PLA BambuLab Matte Charcoal Transmission Distance: 0.6
    PLA PolyLite Grey Transmission Distance: 1
    PLA BambuLab Basic Gray Transmission Distance: 2
    PLA BambuLab Matte Ivory White Transmission Distance: 3.5
    PLA BambuLab Matte Scarlet Red Transmission Distance: 2
This print uses 5 unique filaments

Swap Instructions:
    Start with Charcoal
    At layer #7 (0.64mm) swap to Grey
    At layer #8 (0.72mm) swap to Charcoal
    At layer #13 (1.12mm) swap to Gray
    At layer #14 (1.2mm) swap to Ivory White
    At layer #19 (1.6mm) swap to Charcoal
    At layer #20 (1.68mm) swap to Scarlet Red
    At layer #22 (1.84mm) swap to Charcoal
    At layer #25 (2.08mm) swap to Ivory White for the rest.

Comment & Rating (0)

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.