Snap Fabric - A modular NASA JPL fabric remix Remixed by Edna

Remixed by

Edna

Household>Other House Models

IP Report

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

20x Style - 0.12mm layer, 4 walls, 15% infill

Designer

1.8 h

1 plate

4.3(9)

20x Strength - 0.28mm layer, 4 walls, 15% infill

Designer

1 h

1 plate

4.5(4)

Open in Bambu Studio

Boost

171

205

118

Released

Description

Snap fabric is a modular fabric that can easily be snapped together, reused, and made into many shapes.

To assemble snap fabric, take two pieces and use the holes in their connectors to snap them together.

It's a remix from the NASA JPL fabric, which was originally not modular. This model is cut, decimated, smoothed, and simplified for a better model.

Do not use Arachne as the wall generator, pieces come out harder to work with.

Boost Me (for free)

Comment & Rating (27)

@Armadillojs1

Boosted

Print Profile

20x Style - 0.12mm layer, 4 walls, 15% infill

This looks and feels so cool. I’m going to try to make a shirt out of it because I have nothing better to do with my life.

@Viking_Mando

My son wants the same to wear to the Ren Faires.

@user_2290034745

!!!DO NOT PRINT!!! the ends kept snapping off when I tried assembling them and I couldn't make anything thank me later

The designer has replied

@ednaordinary

sad to hear you didn't have a good experience :( Are you printing with the style or strong profile? I'd also recommend drying your filament (or trying a different spool) if you're at all able, since that would increase tensile strength. These pieces are generally weaker due to the disconnected end, which sacrifices some strength for customizability, but I didn't find it so bad that nothing can be assembed? My pieces took some force to break

(Edited)

@user_2290034745

I printed with strength and my filament is fully dry and it's not a printer problem my a1 mini is fine but it's ok it doesn't matter much I don't need these so no need to re design it's all fine

@user_1398010425

Print Profile

20x Style - 0.12mm layer, 4 walls, 15% infill

Other Issues:Might be a problem on my side but 3 of them came out with broken 'legs' burnt at the end. (If this is a me problem how do I fix it?)

@ednaordinary

Hmm.. can you take a picture of "burnt"? Not quite sure what this means

@user_1398010425

Replying to @ednaordinary :

This:

@ednaordinary

Replying to @user_1398010425 :

That's quite odd, never seen that before and I don't believe that's an issue on my end. Are you using the right temp for your filament, anything weird in the ptfe tube?