Puck Puzzle

Copyright Claim

Puck Puzzle

Boost
26
40
10

Print Profile(1)

All
X1 Carbon
P1S
P1P
X1
X1E
A1

0.2mm layer, 2 walls, 10% infill
0.2mm layer, 2 walls, 10% infill
Designer
34 min
1 plate
5.0(6)

Open in Bambu Studio
Boost
26
40
10
4
69
51
Released

Description

I remember printing this model nearly ten years ago with my first printer. I've searched on Thingiverse and wasn't able to find it again, so I made my own version. It's not particularly hard to solve, but it's kinda fun and doubles as a fun little fidget toy too.

 

I print it all together at once. The tolerances are 0.25mm, so make sure you use your tuned filament profiles to avoid binding. The ones I've printed have come off the plate moving freely.

 

Enjoy!

Comment & Rating (10)

Please fill in your opinion
(0/5000)

Boosted
I printed it but I can only get two parts to move and neither of them are able to remove from the outside.
The designer has replied
0
Reply
I'm sorry to hear that. The tolerances are pretty tight on purpose and if one piece won't move, none of them will be able to come out. Did you print straight from the app with my profile or did you download and print from Bambu Studio with profile modifications? I could see slight overextension being a problem or possibly seam location if not using my profile. Mine had zero binding right off the plate. If others are having binding issues as well, I can put up a file with increased tolerances, but it makes the puzzle a bit less satisfying, but not as dissatisfying pieces not moving.
0
Reply
Boosted
Replying to @Panacaguy :
I printed directly from makerworld to my A1.
0
Reply
Boosted
Replying to @xrain :
I was able to finally get the last one started moving after about of fiddling with it for about 10min.
0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
Made some changes to be used as a geocaching field puzzle.
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 10% infill
nice puzzle took a bit to get all 3 moving but was then able to disable the reasssemble it.
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 10% infill
Nice puzzle
0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 10% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
0
Reply
No more