Halloween Tray by Retron Print

Retron Print

Household>Decor

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 7% infill

4.6 h

1 plate

5.0(7)

Open in Bambu Studio

Boost

147

Released

Description

An organic-looking Tray for everyday small objects. Bowl in the shape of a rock and dead tree.

Good for jewellery, rings, and watches.

Designed to be printed in two halves and glued together.
No support is needed.
Designed to print on small printers.

Comment & Rating (13)

@OliDaBomb

Great print! Highly recommend using plastic glue to reduce the seam lines as much as possible. Irrespective, the lines are barely noticible once it’s being used as designed. For those that are inspecting the print in detail, yes there is a seam line. A small amount of post processing can eliminate this entirely. Lovely print. Would love to see some bush/brush that can be printed and put on some of the branches to add some depth and colour. 10/10

@user_3103349143

Print Profile

0.2mm layer, 2 walls, 7% infill

didn’t look before that it’s two parts. but both printed perfectly.

@aegA1

Boosted

Print Profile

0.2mm layer, 2 walls, 7% infill

nice print petc transparant

@user_2038320967

Boosted

it's very easy to print and beautiful

@BigJay

Boosted

Big fan of this model, printed without any issues and when glued together, the seem was unnoticeable.

@user_2038320967

Boosted

It would be best if you can print the whole thing, because there is a gap that is more obvious.

The designer has replied

@RetronPrint

The separation of the model into two halves was a deliberate design process. The visibility of the gap depends solely on the quality of the gluing. Printing on the side gave some strong benefits. Layer lines are very barely visible, and those that can be seen look like wood grain. Printing on the side, in this case, completely eliminated the need for supports which significantly improved the quality of the print itself.

@linan0207

Print Profile

0.2mm layer, 2 walls, 7% infill

good

@Smitty010203

Print Profile

0.2mm layer, 2 walls, 7% infill

Very cool print. I almost combined the 2 halves to get rid of the seam but as the creator suggest, the print does better split in half. Just take your time gluing it up. Only suggestion I would make is some sort of indexing keys to align the parts when you put them together.

@aegA1

Boosted

nice

@Reefer

Print Profile

0.2mm layer, 2 walls, 7% infill

thanks 🙏

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.