1. Pegboard dimensions are modeled after SKADIS and can be seamlessly joined, high-strength materials such as PETG are recommended for printing.
2. This kit offers a no-drill wall mounting solution requiring adhesive hooks. Hook screws must exceed 12mm in length; 12mm or 14mm are suggested.
3. Some kit components require magnets: 4x2mm cylindrical magnets and 20x5x3mm rectangular magnets.

4. Adhesive hooks are available on Taobao or Pinduoduo; a few dozen can be purchased for around 10 yuan on Pinduoduo.

   Assembly video: queazy3 (@queazy3) | TikTok

   October 5th Update:

   1. Added three new pegboard sizes: 240x100mm, 120x200mm, and 120x100mm. These can be printed in various colors and combined.

   2. Smaller pegboards are segments of the 240x200mm board. To ensure consistent hook placement across all sizes, the 240x100mm and 120x200mm boards are not identical; each requires its own hook placement design to match the 240x200mm. Similarly, the four 120x100mm boards are unique; all four must be printed and assembled to maintain consistent hook placement with the 240x200mm board.

   3. For mobile users, PLA and PETG print files are now available for all pegboard sizes. Heed the on-plate instructions during printing.

November 20th, 2024 Update:

1. Improved pegboard fastening method using 8mm screw adhesive hooks The nut sits below the pegboard surface, preventing interference with hanging items and increasing pegboard utilization efficiency.

2. Added recessed magnet holes to the pegboard. The print will automatically pause, allowing for magnet insertion. Currently configured for 20x5x3mm and 4x2mm magnets. Please leave a comment for other magnet sizes.

3. Ensure adhesive hook screws are exactly 8mm in length. Verify with the supplier before ordering.

4. The new improved pegboard is compatible with the original version; they are the same height and do not affect item placement. Observe the pegboard mounting direction as shown in the image below.