A1 printer Z+X axis combined cable protection drag chain by 非标设计师Mobay

非标设计师Mobay

3D Printer>3D Printer Accessories

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 6 walls, 25% infill

Designer

10.9 h

2 plates

4.4(15)

0.2mm layer, 2 walls, 15% infill - This configuration is for the old single Z-axis cable

Designer

4 h

2 plates

4.5(17)

Z-Axis and X-Axis Integrated Cable Chain Configuration

Designer

8 h

2 plates

4.7(6)

Open in Bambu Studio

Boost

151

379

495

229

Released

Description

A1的Z轴拖链，用于保护电缆，防止电缆到处乱跑。

我已经推出连同X轴拖链，折角角度合适不会下坠，美观又好用！

Z轴电缆带翻折铰链，防止打印最高物品时不会拖拽电缆，然而最重要的是喷头最低位时也不会过度折叠线缆哦！

X轴拖链下垂问题已解决！！！

The Z-axis drag chain of A1 is used to protect cables and prevent them from running around.
I have already launched a product with an X-axis drag chain, which has a suitable bending angle and will not fall down. It is beautiful and easy to use!
The Z-axis cable has a folding hinge to prevent dragging the cable when printing the highest item. However, the most important thing is that the cable will not be excessively folded when the nozzle is at the lowest position!
The problem of X-axis drag chain sagging has been solved!!!

为我助力 (for free)

请大家多多支持，谢谢！

为我助力 (for free)

Please provide more support, thank you!

Comment & Rating (63)

@user_1554966439

Hi, I don't know how to place the piece I'm showing in my hand. Could you add photos? Thanks!

@MiReu

The assembly was not clear to me at first either. I then loaded the parts into SketchUp and put it together (I have to change it because I'm using a wider chain). To make it easier to recognize, I have “built in” each part in a different color and only one chain link. Now everyone should understand how the parts belong together. Greetings MiReu

(Edited)

@user_1554966439

Replying to @MiReu :

Thank you, thank you and thank you! :)

@davireba

Boosted

Replying to @MiReu :

Could you maybe post the wider chain? @MiReu ? I want to put in a led strip cable but it sits too tight for my liking. Or maybe @Designer_Mobay you have something like that?

@user_797097710

Boosted

Thank you so much, it turned out realy nice! I realy like how it looks and fits around both cables. And also great job on preventing it from sagging. It stands firmly. One thing that I would like to suggest is to slightly offset the base of the chain from the top of the X-axis extruder. In combination with the AMS Lite top mount with enclosure the chain will rub against the enclosure when going up high. In the most top and center position the base of the chain will even push againts the enslosure, making it bend a bit backwards. Currently I am not printing a lot of high models, so this is not a problem yet, but I can see this be a problem in te future.

(Edited)

@lee_3937

Excellent, this solves two pain points at once, although the Z-axis cable chain plus the LED wire is indeed a bit tight, but it's not a major issue.

The designer has replied

Show original

@Designer_Mobay

Your photos are truly exceptional! Therefore, I've borrowed them to use for the cover.

Show original

@user_869218669

Boosted

I'm Having problem with the x axis chain sagging and getting jammed against the right side. Any ideas how to correct this. I love the design but it sticking on the right side is interfering .

(Edited)

The designer has replied

@Designer_Mobay

I sincerely apologize for the inconvenience caused by my oversight! The sagging issue was addressed the night before last, and the file has been re-uploaded. Please delete any previously downloaded files and download the new file for printing.

Show original

@user_869218669

Boosted

Replying to @Designer_Mobay :

Thank you so much. Great job!

@AndyCar

Print Profile

0.2mm layer, 6 walls, 25% infill

No printing issues

Show original

@nikkon04

Print Profile

0.2mm layer, 6 walls, 25% infill

Unfortunately, one of the holders broke during assembly and had to be reprinted Otherwise, a superb upgrade for my A1

Show original

@TFraX

Print Profile

0.2mm layer, 2 walls, 15% infill - This configuration is for the old single Z-axis cable

print came out really well. some sharp edges but used some 800geit sandpaper to smooth it out. the piece that snaps to the camera part had a top piece made for the top wire drag chain if you choose to print that. I didnt as I have another cord spring. so I had to grind the inside of that piece as it is a snug fit around the cord.

@davireba

Boosted

So the bottom part is very well designed, but the top part is very saggy. Like this it loses its purpose and I don't want to switch to another one. Maybe someone has a fix? I feel like if you would make the back portion a little longer it might help

@ModdwerxTech

you should flip the drag chain, it will put a massive arch in the chain and it won’t droop down like that

@user_1514267900

Print Profile

0.2mm layer, 6 walls, 25% infill

No problem Excellent

Show original

@Lohojo

Print Profile

0.2mm layer, 2 walls, 15% infill - This configuration is for the old single Z-axis cable

I enjoyed the profile, it took some time to figure out how to install everything but I managed. I did not print the top part because the model in the printing is not the same as in the picture. See my images for explanation. If I could have the model without the top attachment, it would be perfect (like on the full tray) because when printing it offers me something I don't want (picture of the attachment alone).

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.