Modified AMS Lite Vertical Mount Remixed by McDanielDesigns

Remixed by

McDanielDesigns

3D Printer>3D Printer Accessories

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

11.3 h

2 plates

4.7(37)

Open in Bambu Studio

Boost

134

267

329

193

Released

Description

I mixed together an AMS Lite Vertical Mount, Humidity Sensor holder screw for the front and a new customized latch based on the Bambu Labs top mount that allows for another screw to hold it in the rear for extra stability.

The only screws used in this are two from the bag labeled “For Top Mount Latch” from Bambu Labs AMS Lite Top Mount Screws Kit, all other parts are printed. There is also a hole on the vertical mount that you use to lock in the AMS using a screw already in the AMS.

You should probably pair this with A1 Anti Vibration Feet Risers or the Bambu Labs Top Mount stabilizer legs to keep better balance when printing. In most cases it doesn't seem to be necessary but does help with the center of gravity.

Bill of Materials

List other parts

BT3-23 x 2: ForTopMountLatch

Download BOM

Comment & Rating (64)

@scottschmelzer

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Great print…thanks!

@efeng

Print Profile

0.2mm layer, 2 walls, 15% infill

works great

@DJTILT

Print Profile

0.2mm layer, 2 walls, 15% infill

very good. stable

@Scottopotomus

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Sadly I lost a print halfway through for whatever reason, so I changed to some wood filament and I don't love the color, but I'll paint it. It looks like cardboard! lol. I just had a bunch of it. Works great but it definitely makes it very top heavy. I strapped it to a pole I have screwed to my wall. Works great though. But use decent filament. The stuff I used is pretty bad. lol. Still got the job done though!

@Finneas

Just printed this. Works great. One thing that initially confused me is that the AMS unit needs to be flipped upside down (so the numbers are upside down) to make this work. I have it in place, with the single spool holder next to it, and no support feet. For the hinge, I just used some extra lengths of filament.

The designer has replied

@MickyD

Yes it does need to be flipped upside down I apologize for that not being made clear im sorry about that

(Edited)

@user_2357145185

Nice work. It looks like your setup would allow the original single roll holder to fit on the same bar. Could you check this? did you have to use longer ptfe tubes?

The designer has replied

@MickyD

Same length PTFE tubes that you get in the first place with the A1 and yes the external roll fits on there at the same time no issue.

@user_2357145185

Replying to @MickyD :

That's fantastic!

@brizel

Print Profile

0.2mm layer, 2 walls, 15% infill

With four filament spools loaded, the weight in the rear was excessive, causing the front of my A1 to lift a few millimeters. This could certainly have been resolved with additional supports, but I didn't try that.

The designer has replied

Show original

@MickyD

So you still gave it two stars? Although, I listed in the description that you shpuld use anit-vibration feet or stabilizer legs? You were warned before printing.

(Edited)

@brizel

Replying to @MickyD :

Yes, because I couldn't use it. It was lifting up the front of my printer. The description says printing the additional stuff will not be needed in most cases. But in my case it's necessary. So it's a two ⭐ for me. I would love to see a version 2 with the center of gravity shifted to the front. It' a good idea, but it needs to be improved. At least before I can use it.

@MickyD

Replying to @brizel :

I understand. I'm sorry it didn't work out for you. If you don't want all that filament to be wasted the stabilizers will for sure fix the issue but that's up to you 👍🏻

@DamnitDannie

can this be printed with regular PLA?

The designer has replied

@MickyD

Yes, it absolutely can. Im sorry for the delay messaging back if didn't see this!

@DamnitDannie

Replying to @MickyD :

no worries! thank you!

@fdoc2010

Print Profile

0.2mm layer, 2 walls, 15% infill

Many thanks, it worked well.

The designer has replied

Show original

@MickyD

Thank you I'm so glad it's working well for you!

@user_3482428118

what humidity sensor is that in the picture

The designer has replied

@MickyD

You can get them off Amazon here 2 Pack Mini Digital Hygrometer... https://www.amazon.com/dp/B07GR67G1M?ref=ppx_pop_mob_ap_share You can get them from Bambu as well Amazon is just usually faster especially for me.

(Edited)