Iphone 14 Pro Cover by Michele_23129

Michele_23129

Hobby & DIY>Electronics

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 3 walls, 45% infill

Designer

2.8 h

2 plates

4.6(19)

Open in Bambu Studio

Boost

375

185

Released

Description

iPhone 14 pro cover

Print the main part in TPU and the camera protection in rigid plastic like TPU or PETG

The cover fit only with 14 pro smartphone model.

Comment & Rating (33)

@22_ARGO_13

Print Profile

0.2mm layer, 3 walls, 45% infill

It unfortunately doesn't work at all with PLA But it's my fault, therefore five stars;)

The designer has replied

Show original

@MicheB90

Thanks for the stars.. unfortunately, with PLA is not possible to assemble the cover on the phone.. too rigid material

@BenRhy88

Can you tell me, wether a Support is required or not?

The designer has replied

@MicheB90

hi, yes I put the support in some internal areas.. heva a look to the 3mf file.. then probably they are not all necessary but I never tried to print without support.

@BenRhy88

Replying to @MicheB90 :

Thanks for your reply, ok i try it with support for safety

@BenRhy88

I have printed it yet, and scales it to 99,60% and it fits perfectly. I also added a Paraglyde Logo, without any Problems.

@user_3978702914

Hello, great case! However, I would like the top edge to be a little wider so the phone is held more securely. It tends to slip out. Is there any way to do that?

The designer has replied

Show original

@MicheB90

hello, yes, sure.. give me some time and I can introduce the improvement.

@KetchupPacket

printed with my a1. what is the print orientation? if it’s flat on it’s back it has no design.

The designer has replied

@MicheB90

hello, to obtain the sparkling effect on the cover backside you need to print the model on a 3d effect plate. if you use a standard plate you won't have any design on the back.

@fady

can it be printed with pla?

The designer has replied

@MicheB90

Hi, no, the cover has been thought to be printed in TPU. The contour is continuous so printing the cover in rigid matirial you won't be able to assemble the phone inside.

@user_258151785

Print Profile

0.2mm layer, 3 walls, 45% infill

Printed well but you cannot plug in your cable charger.

The designer has replied

@MicheB90

Hi, if you use original apple chargin cable it will work.

@retrosumo13

Print Profile

0.2mm layer, 3 walls, 45% infill

thanks

@Tarlo90

Boosted

Utile!

@ClarksTech

Print Profile

0.2mm layer, 3 walls, 45% infill

amazing!

@Lukes_3d

Print Profile

0.2mm layer, 3 walls, 45% infill

The fit could be better, I just don't like that there isn't much material protecting the screen but im rolling with it for now could you add maybe .02-.03in to the top surface maybe

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(1)

Description

Comment & Rating (33)

License

Related Models

Handle Collection

Iphone 16 PRO / PRO MAX camera dust cover

Rope handle

simple handle