A beautiful meshed vase, the pattern is created by two repeating, intersecting spirals. The bottom plate has a mesh with hexagon pattern.
This vase can be a little torture test, but Bambu Printers should be able to handle it pretty well. Make sure your filament is dry and don't print too hot. I had great success at 200-210° C for PLA. Cooling is also very important; If your printer is enclosed, leave the door and lid open. And obviously, make sure your build plate is free of fat and in good condition. I printed it with a cold plate, but PEI should work as well.
Even under best conditions, you will probably still see some stringing, so get your lighter ready! Go slow and be careful when removing the stringing with a flame, the vase will become very soft if it gets warm. Do breaks to let it cool down and don't apply to much pressure.
Update:
As requested, I added a version with a solid top ring.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (14)