BigTreeTech Panda Box by DaShark

DaShark

3D Printer>3D Printer Accessories

IP Report

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.4mm nozzle, 0.3mm layer, 2 walls, 15% infill

Designer

1 h

1 plate

5.0(13)

Open in Bambu Studio

Boost

107

Released

Description

The new Panda Branch for the A1 and P1P series doesnt come with a box and so i designed a simple one that doesn't require any adhesive or screws. could use some double sided tape though to attach it to either the back of the arm or the top of the base. I plugged in a 5v led strip i got off amazon.

Comment & Rating (29)

@DudePT

Print Profile

0.4mm nozzle, 0.3mm layer, 2 walls, 15% infill

amazing work. thanks

@DaShark

awesome thank you!!!

@quadds650

Print Profile

0.4mm nozzle, 0.3mm layer, 2 walls, 15% infill

Printed with PETG transparent filament. Came out great.

@DaShark

thank you!

@adobekenobi

Fantastic work! just have one question though. You mention that it doesn't require adhesive or screws, but mine will require adhesive in the peg holes. Did i miss something?

The designer has replied

@DaShark

it just snaps together for me. but every printer is different so your tolerances might be a bit different

@adobekenobi

Replying to @DaShark :

cool. thanks!

@PeBe

Print Profile

0.4mm nozzle, 0.3mm layer, 2 walls, 15% infill

@Asakiro

Boosted

Print Profile

0.4mm nozzle, 0.3mm layer, 2 walls, 15% infill

so much better cable fitting compared to the original 👍👍

@DaShark

thank you!!! what do you mean the original though? when I designed this one it was before any cases for it were made…

@Asakiro

Boosted

Replying to @DaShark :

Sorry.. just named the BIGTREETECH Case/Adapter for the Branch "original" 😅 and compared to that, your design is better (especially the cable slots) 😉 okay, maybe it shouldnt be compared because of different use cases 🤷🏼‍♂️ https://makerworld.com/de/models/606669?from=search#profileId-529547

@DaShark

ah I see. well thank you!!

@bbasselgia

Print Profile

0.4mm nozzle, 0.3mm layer, 2 walls, 15% infill

The case prints great. All of the examples I see have this mounted on the P1s using the spool holder screw holes and then on the side of the printer. But I have a slide-mounted spool holder, so that area is not available. Does anyone have any other mounting ideas?

@DaShark

I haven’t seen them being used on p1s I’ll look into and see! but you can always use double sided tape 🤷🏽‍♂️

@user_675001295

Boosted

printed perfectly , just waiting on the branch now

The designer has replied

@DaShark

thank you!!!

@user_3516519218

A lot better looking than the original from BigTree!! And much more simple to print too.

The designer has replied

@DaShark

thank you!!

@javy_Ok2

Print Profile

0.4mm nozzle, 0.3mm layer, 2 walls, 15% infill

Perfect!!

@DaShark

thank you!!

@Jurik

Print Profile

0.4mm nozzle, 0.3mm layer, 2 walls, 15% infill

Super easy to print and looks fantastic

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Small Clip - for herb bags & other packaging

860

Print Profile(1)

Description

Comment & Rating (29)

License

Related Models

Small Clip - for herb bags & other packaging

Red Panda Dude

Stackable Box

PRINT IN PLACE Large Hinged Box - 10 Compartments