Cute Ghost with Stanley style Tumbler by animuL67

animuL67

Household>Festivities

IP Report

Print Profile(15)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.16mm layer, 2 walls, 15% infill (tumbler only, no ghost)

Designer

20 min

1 plate

5.0(103)

0.16mm layer, 2 walls, 15% infill (ghost alone)

Designer

6 h

1 plate

5.0(83)

0.16mm layer, 2 walls, 15% infill (ghost and tumbler)

Designer

11.5 h

1 plate

5.0(43)

0.2mm layer, 2 walls, 15% infill (beanie only)

Designer

1 h

1 plate

5.0(25)

Click to see more

Open in Bambu Studio

Boost

1265

2071

395

262

2.3 k

1.2 k

Released

Description

Update: I have no issues with you selling the physical parts but please give credit where its due and do not simply list these digital files for sale. I'm happy to support a small business as a supplier for them to sell physical parts but as for the digital downloads, these are free and should be downloaded here or thru me. -animuL67

Cute, not that spooky, little boo-jee ghost sipping out of the stanley-style tumbler. Hollow if you want to light it up.

Check all the profiles for different versions and accessories including a ball cap, beanie, baby yoda, hollow eyes and mouth, etc.
Find the Valentines heart here: https://makerworld.com/en/models/1017442#profileId-997968

If you get a line defect above the eyes try changing to arachne walls

If you get black bleeding into the white increase your filament flushing volume

I modeled this off a picture so while the idea isn't mine, the model is 100% my creation.

Comment & Rating (395)

@GruesomeJeans

Print Profile

0.16mm layer, 2 walls, 15% infill (ghost and tumbler)

very cute design! I didn't have enough plain white so I used a bone white. I think it turned out ok. I still have to print the hat so I'll update with those pictures when it's done! I'm not sure why there is a layer defect at the top but I usually chock it up to color change effects. update, printed the hats too! slightly customized of course. the supports are a little difficult to remove but not bad overall.

@animuL67

I'm not sure why it does that ring defect but it happens on all of my printers and the model is smooth there. I made the ghost a little hat incase it feels insecure about it.

@GruesomeJeans

Replying to @animuL67 :

I've also got some hats printing. they required some special treatment due to their application so they are slated to take 8 hours to print 4 but I think it'll be worth it

@animuL67

Replying to @GruesomeJeans :

Awesome! Hope to see pics.

@adobekenobi

Boosted

Print Profile

Ghost with separate eyes and mouth + adaptive layering

This was so fun to print and the use of natural light to make it glow was the icing on the cake.

@say_no_to_poop

nice looks great! What filament is that?

@adobekenobi

Boosted

Replying to @say_no_to_poop :

thanks! it was something that I found on aliexpress https://a.aliexpress.com/_mNxuwdE I want to do a full size Slimer from Ghostbusters, and this looks like the right color. now if I can only find it in bulk.

@say_no_to_poop

Replying to @adobekenobi :

haha that was exactly what popped into my head when I saw it "that would make a perfect Slimer!"

@Arkadij

Print Profile

0.16mm layer, 2 walls, 15% infill (ghost alone)

On foto you can see why 4 stars

@animuL67

I understand but the issue is with your flushing volumes which will vary depending on the user and the reason why others dont have this problem. Increase your black to white flushing volume and you will hopefully get 5 star results. Thanks.

@Arkadij

Replying to @animuL67 :

Thank you for good model. I printed it again with the corrected cleaning options and it came out better.

@animuL67

Replying to @Arkadij :

great news!

@BunnyPrints

Boosted

I'm so obsessed with this lil guy, i had to print him as big as i could lol Thank you for the adorable print!

The designer has replied

@animuL67

Looks great! Glad you like it. As soon as I find the time I have a pop can and Starbucks Grande for the ghost to hold.

@tadpol

Replying to @animuL67 :

i need this

@animuL67

Replying to @tadpol :

starbucks grande is up!

@ClicquotOh

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill (ghost and tumbler)

Love this. Chosen as my first project with my new A1 and AMS- happy with all of it. The print time is ALOT (causing anxiety for sure ;-D) but all good. Did not make any changes in slicer- wanted to try just grabbing it and pushing the "go" buttons. Printed in all generic PLA (all "cheapy" from amazon). The detail is amazing (tiny handle and straw on cup), pre-sliced supports were sufficient and easy to remove.

@animuL67

looks great! See my other print profiles for versions that print faster like the one with separate tumbler.

@ClicquotOh

Boosted

Replying to @animuL67 :

thanks! I did see all the versions (that is fantastic)- this was more of a test of the auto color changing AMS, so I chose the one with all of the transitions, knowing it would increase print time. All of the color transitions worked perfectly (both your model/slicer settings and the hardware). My anxiety with prints over about 3 hours is- I am clumsy, I have multiple cats to shoo and we lose power more than is acceptable. Good to know about the other versions. I will probably do more- and add multiples to the bed- to make the most of the transitions and not increase the time all that much.

@jamedeo

Boosted

These have been a massive hit for my wife and her coworkers. I keep printing more and more!

@TheWalkingDad86

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill (beanie only)

Printed for the children in kindergarten. The children were all very enthusiastic 😉

Show original

@animuL67

That is good

Show original

@JessIsTheBest

Print Profile

0.16mm layer, 2 walls, 15% infill (ghost alone)

I don't know where the weird banding in the model came from. I printed it in solid white and used a sharpie to color the eyes and mouth. All in all the model is great and the wife and kids love it. The addition of the extra cups is nice.

@animuL67

sorry to say but it looks like you are having some printer issues. If you look thru other comments and see pics they don't hae that banding you mention. Some have a slight band above the eyes but that can be corrected by using arachne wall generator option in Bambu Studio. Best of luck sorting that out and thanks for the comment and rating!