Back to the Future Triptych - Part 02/03
Back to the Future Triptych - Part 02/03
Print Profile(1)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 100x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3.6mm and the Actual Depth is 3.6mm
Filaments Used:
PLA Overture Black Transmission Distance: 0.4
PLA eSUN Blue Gray Transmission Distance: 0.8
PLA Winkle Ash Gray Transmission Distance: 2.8
PLA Smart Materials White Transmission Distance: 6.8
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Blue Gray
At layer #29 (2.4mm) swap to Ash Gray
At layer #34 (2.8mm) swap to White for the rest.
Boost Me (for free)
If you like it, remember to hit the like and boost button.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The model has a size of 100x150 mm
You can print with layer heights above the minimum depth of 0.48 mm.
The maximum depth is 3.6 mm and the actual depth is 3.6 mm
Filaments used:
PLA Overture Black Transmission Distance: 0.4
PLA eSUN Blue Gray Transmission Distance: 0.8
PLA Winkle Ash Gray Transmission Distance: 2.8
PLA Smart Materials White Transmission Distance: 6.8
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Blue Gray
At layer #29 (2.4mm) swap to Ash Gray
At layer #34 (2.8mm) swap to White for the rest.
Boost Me (for free)
If you like it, remember to hit the like and boost button.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)