user_3089937591

Brims | Original-Colors | 0.2mm layer, 2 walls, 15% infill

Impression et montage facile, mon neveu est ravi

Easy to print and assemble, my nephew is delighted

Ironblue

So far so good! Now on to the next plate!

Zacald

Impression et montage facile, mon neveu va adorer.

Easy printing and assembly, my nephew will love it.

Fun build. My kids definitely thought it was a neat finished build.

Jrmass

One of my favorite models! Printed flawlessly and was super easy to assemble. Very fun to play with!

jarvizar

meh, edge pieces won't all snap in to secure.

type2b

Nur mit Kleber gut haltbar! Ansonsten Top!

Vego

Had some initial issues with the included support but with added support and slower print had success ultimately. printed in PLA silk so that may have affected print quality. used as a trophy for the winner as a maze game and they all loved it!

Doog95

so far so good still working on the 4th sides

user_1001965520

for A1 Mini | Brims | Original-Colors | 0.2mm layer, 2 walls, 15% infill

twgondeck

cover

20231208_232858_db7c514f-22cb-49cf-ba00-8b980ac474d4.webp

plate_1.webp

plate_2.webp

plate_3.webp

plate_1.png

plate_2.png

plate_3.png

AU3D

Make sure you have excellent bed adhesion. Otherwise you risk a print failure. I had multiple failures, so I added brims to the support structure. In the end I still had to use an extra textured build plate which is extremly sticky. Maybe try hair spray.&nbsp;Beware that you have to glue the red connection crosses to the model. The friction is not enough to hold everything in place. Post processing took me about 15 minutes for the cleanup and about 10 minutes for glueing. I used a thick ca glue.

20231208_232920_1726c832-ea5d-47d4-b2d4-0d313dedf305.webp

plate_4.webp

plate_5.webp

plate_6.webp

plate_4.png

plate_5.png

plate_6.png

Make sure you have excellent bed adhesion. Otherwise you risk a print failure. I had multiple failures, so I added brims to the support structure. In the end I still had to use an extra textured build plate which is extremly sticky. Alternatively, try try hair spray or slow down the print.&nbsp;Beware that you have to glue the red connection crosses to the model. The friction is not enough to hold everything in place. Post processing took me about 15 minutes for the cleanup and about 10 minutes for glueing. I used a thick ca glue.

It's a maze! It's a cube! It's surprisingly addictive.&nbsp;Fits 3/8" ball bearing (anything smaller than 10mm). Print one of each corner and 6 brackets. Corners are labeled, just match up the letters to the corresponding corners.&nbsp;I also made a set that is pre-supported to help make sure they don't fall over while printing.

Print Profile(2)

Description

Comment & Rating (15)

License

Related Models

The Cube

FIdget Cube V2

Fidget Cube

Infinity Cube fidget toy

A-Maze-Ing Cube