PET COUCH/ SOFA (for cats and small dogs)
PET COUCH/ SOFA (for cats and small dogs)
Boost
30
36
0
Print Profile(4)
LIGHTNING SOLID 0.16mm layer, 3 walls, 15% infill
Designer
17.8 h
7 plates
LIGHTNING HOLLOW 0.16mm layer, 3 walls, 15% infill
Designer
23.3 h
7 plates
GRID SOLID 0.16mm layer, 2 walls, 10% infill
Designer
26.3 h
7 plates
GRID HOLLOW 0.16mm layer, 2 walls, 10% infill
Designer
32.2 h
7 plates
Open in Bambu Studio
Boost
30
36
0
1
31
6
Released
Description
Boost Me (for free)
If you like this model, please consider boosting me <3
I designed this cat bed using Fusion360.
It is a pretty large print (if you print it full size), each peice fits on the bed and requires minimal supports.
The model can also be scaled without issue.
Print Profiles
Here is a table with a description of each print profile and the amount of filament used for each one. I strongly recommend using the highlighted first profile “Lightning Solid, 3 walls, 15% infill”, as it should be solid enough without using too much filament.
| Profile | Info | Filament used | Supports used | Total used |
|---|---|---|---|---|
| Lightning Solid | 3 walls 15% infill | 727.42g | 27.02g | 754.44g |
| Lightning Hollow | 3 walls 15% infill | 800g | 164g | 964.62g |
| Grid Solid | 2 walls 10% infill | 1143.89g | 27.32g | 1171.21g |
| Grid Hollow | 2 walls 10% infill | 962.31g | 163.09g | 1125.41g |
| Lightning Solid | 2 walls 15% infill | 595.33g | 27.09g | 622.42g |
| Lightning Hollow | 2 walls 15% infill | 600.65g | 116.72g | 767.38 |
For the last 2 print profiles, just change the amount of walls from 3 to 2 when using the lightning profile - but please proceed with caution! Especially if you have a larger kitty XD
Tips
- The connectors are used as a guide, please glue each peice together!
- If you run into trouble with the .3mf files, please use the STL files provided.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
Comment & Rating (0)