Print Profile(1)
Description
Description
IMPORTANT NOTE: If you wish to scale the model, DO NOT scale the Z axis, only the X and Y axis.
Print at 100% infill with a layer height of 0.08mm, utilizing a base layer of 0.16mm.
Filaments Used:
PLA eSUN-HS Black
PLA eSUN-HS Blue
PLA eSUN-SS Grey
PLA eSUN-SS White
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue
At layer #11 (0.96mm) swap to Grey
At layer #17 (1.44mm) swap to White for the remainder of the print.
File STL and 3MF: NOT FOR COMMERCIAL USE, ONLY FOR PRIVATE USE.
Photo: Property of Paolo Pettoni
IMPORTANT NOTE: If you wish to scale the model, DO NOT scale the Z axis, only the X and Y axis.
Print with 100% infill and a layer height of 0.08mm, using a 0.16mm base layer.
Filaments Used:
PLA eSUN-HS BLACK
PLA eSUN-HS BLUE
PLA eSUN-SS GREY
PLA eSUN-SS WHITE
Filament Swap Instructions:
Begin with Black
At layer #8 (0.72mm) switch to Blue
At layer #11 (0.96mm) switch to Grey
At layer #17 (1.44mm) switch to White for the remaining layers.
File STL and 3MF: NOT FOR COMMERCIAL USE, ONLY FOR PRIVATE USE.
Photo: Property of Paolo Pettoni
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)