Halloween Pumpkin (tealight compatible)

Copyright Claim

Halloween Pumpkin (tealight compatible)

Boost
2920
5603
944

Print Profile(10)

All
P1S
P1P
X1
X1 Carbon
X1E
A1
A1 mini

Full size, Body and Stem, two colours, 0.2mm layer
Full size, Body and Stem, two colours, 0.2mm layer
Designer
6.7 h
2 plates
4.9(450)

80% scale, Body and Stem, two colours, 0.2mm layer
80% scale, Body and Stem, two colours, 0.2mm layer
Designer
4.1 h
2 plates
4.9(165)

Full size, single colour, 0.2mm layer
Full size, single colour, 0.2mm layer
Designer
6.5 h
1 plate
4.8(44)

Full Size, Body and Stem, two colour, 0.24mm layer
Full Size, Body and Stem, two colour, 0.24mm layer
Designer
5.9 h
2 plates
5.0(18)
Click to see more

Open in Bambu Studio
Boost
2920
5603
944
1 k
7.8 k
4.3 k
Released

Description

Modern Halloween Pumpkin decoration. The model is 90 mm tall and 123mm wide, it can be scaled up to your liking and scaled down to about 75%. I included a print profile for full size and 80% which both fit standard electronic tea lights. I also included files and profiles for printing the pumpkin body and stem in seperate colours, you can simply glue the stem into the body. Additionally I added a 60% scale single body pumpkin in case you want the model even smaller, this does not fit a tea light however.

If you want you can also choose to print the one part model with two colours this will just require a lot of filament changes. 

The inside of the model is hollow to save on filament and to allow the tea light to shine through when using translucent filaments. You will need tree supports and a brim on the inside (these are included in the profiles). 

Compatible with Bambulab LED Flame Tea Light Candle Set

 

If you want to support me or get commercial licenses you can join a patreon membership: https://www.patreon.com/SabreDesign

For one time support you can also buy me a coffe here: https://buymeacoffee.com/sabredesign

 

Check out more of my designs below and on my profile:

 

Bill of Materials

Bambu parts
Buy Now
Download BOM

Comment & Rating (944)

Please fill in your opinion
(0/5000)

I would love to see another version of this where the "top thingy" is printed separated from rest of the pumpkin. Would reduce the print time and waste alot! Its really beautiful.
The designer has replied
11
Reply
Yes thank you for the feedback, I am currently working on that version, will update the model tonight or tomorrow.
9
Reply
Replying to @SabreDesign :
Super! Great news!!
1
Reply
Replying to @MrAronsson :
Model is updated
8
Reply
The support didn’t stick to plate so, my fault. But I thought I’d post a simple solution if some one else’s has the same fault. The hole at the top didn’t fill in completely without the support. I added a black hat 🎩 brim which fills in the slots from underneath.
7
Reply
ended up doing the exact same thing!
1
Reply
same to me
0
Reply
I had the same issue - thanks for the tip
0
Reply
Boosted
Obsession is real, take my boost again.
6
Reply
Boosted
Nice colors! I printed some in different colors, but only the orange version lets light shine through. Do you have this problem too? Maybe the wall needs to be thinner for other colors. Can the gap infill be removed?
1
Reply
Boosted
Replying to @stevenyou :
I printed the 80% version and it shines threw all the colors very well.
(Edited)
2
Reply
May I ask the brand and color name on the tan one? For the pumpkin and the tan? I would like to copy you, very cute color palette
0
Reply
Print Profile
Full size, Body and Stem, two colours, 0.2mm layer
I love this design. It came out so well I had to do it in 3 different colors! The pattern makes a great contrast of colors.
6
Reply
which filament was used for the pumpkins on the picture?
0
Reply
Replying to @user_2589537766 :
Elegoo Orange PLA from amazon. With this model it looks awesome, almost in between matte and regular.
0
Reply
your prints are really good as far as i can See it on the pictures. did you changed something in the print profile?
0
Reply
Boosted
awesome model. printed really well. i did 2 on one plate. both with PLA Silk copper/gold/silver filament, and bambu PLA matte green
(Edited)
9
Reply
Excellent model, the pumpkins print perfectly 👍🏼👍🏼👍🏼👍🏼👍🏼 The support in the middle could be removed without any problems.
Show original
3
Reply
love these! what filiment did you use?
0
Reply
Boosted
Print Profile
Full size, Body and Stem, two colours, 0.2mm layer
Amazing model! Easy to print, elegant look!
3
Reply
Gunna have to try it with the gold!
1
Reply
Best Pumpkin on makerworld 👍
3
Reply
Print Profile
Full size, Body and Stem, two colours, 0.2mm layer
looks great!
2
Reply
Replying to @The account has been deleted :
Bambulab - PLA Basic - Orange (10300) and Bambulab - PLA Matte - Matte Charcoal (11101)
0
Reply
Boosted
Print Profile
80% scale, single colour, 0.2mm layer
ok
2
Reply