Spring Clamp Mix for the Honeycomb Bed

Spring Clamp Mix for the Honeycomb Bed

Boost
37
90
19

Print Profile(1)

All
X1 Carbon
P1S
P1P
X1
X1E
A1
A1 mini

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
51 min
1 plate
4.5(8)

Open in Bambu Studio
Boost
37
90
19
6
130
82
Released

Description

Introducing the Spring Clamp Mix for the Honeycomb Bed of a Laser Cutter — a practical solution for securely holding materials in place on the honeycomb bed. These specially designed spiral springs keep the material firmly positioned, allowing for precise cuts and engravings without any shifting.

The spring clamps are easy to install and provide flexible clamping for various material thicknesses. Ideal for both DIY laser cutter projects and professional applications where accuracy is essential. Download the Spiral Spring Clamps today and enhance the efficiency and precision of your laser cutting setup.

Comment & Rating (19)

Please fill in your opinion
(0/5000)

Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Great addition to the laser engraver.
The designer has replied
1
Reply
Thank you. wgich one do you use?
0
Reply
Replying to @ReinAir :
Elegoo Phecda
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Had to scale to 85% to fit my honeycomb, but works perfectly!
The designer has replied
1
Reply
Great. What model do you have?
0
Reply
Replying to @ReinAir :
I have the TwoTrees 440x440mm honeycomb from Amazon.
(Edited)
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
woulda gone 5, but there are 3 sizws of honeycomb
The designer has replied
0
Reply
What honeycomb do you have? you can scale to your needed size
0
Reply
Replying to @ReinAir :
i have a generic one, aluminum. it is a laser cut expansion however the mesh is much much smaller, i played with the insertion asterisk shape a bit and it just a no fly zone, by the time i got it to the point it would fit the head was exceptionally small, and while this is interesting, i have made a design that works, and it has a slip overr for my elagoo phecda branded mesh which being steel is larger honeycomb.
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Good files, worked on the Xtool D1 Pro honeycomb
The designer has replied
1
Reply
Thanks for the information 👍
Show original
0
Reply
will not work for an OMTech. in case anyone is wondering
The designer has replied
1
Reply
The design can possibly be scaled.
Show original
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
They are indeed difficult to loop, always getting in the way, and they are too high if you work with 3 mm material, making them obstructive. However, the idea is good.
The designer has replied
Show original
0
Reply
I have designed it for my honeycomb. But you can scale it to your needs
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Printed great with supplied profile.
1
Reply
It works for my Dofiki Honeycomb bed 400x400 like a charm. I would asume that if you have a bigger hoeneycomb mesh, you could scale this clips to fit.
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.