GU10 LED Ceiling Spot Light / Philips Hue / Lampe
Print Profile(1)
Description
Unfortunately, the standard Philips Hue recessed spotlight was too big, so I had to print my own.
A support structure is only required for the adapter. However, only for the heel.
The thread does not need any supports.
A standard drill for cavity wall sockets or normal sockets with 68mm is required for installation.
M5 fusible sleeves must be inserted into the holder.
_________________
Material required:
- M5 fusible sleeves
- DIN4762 (old DIN912) M5x20 or M5x25 cylinder head screws
__________________
Assembly:
- Insert holder into the cavity wall
- Screw the adapter to the bracket
- Two or just one holder can be used
- Insert and wire the LED lamp
- Screw the sleeve onto the adapter
- Make sure that the lamp is in the cavity of the sleeve
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)