This is a standby mode dock compatible with the iPhone 12 to 15 Pro & Max.
The size has been modified to conveniently hold the iPhone with a case.
The current dimensions have been changed to 165*82.6mm, and you can also download the f3d file to modify the dimensions in Fusion 360.
UPDATE (2024-11-17):
UPDATE (2024-10-29):
Reduced the size of the MagSafe : from 56.6mm to 55.6mm. This adjustment was made after receiving feedback from many users who found the original size too large. Multiple tests confirmed that 55.6mm is more suitable, though tolerances may vary depending on the material. During charging, the MagSafe may be removed along with the iPhone due to heat. Double-sided tape is still recommended for reinforcement.
Increased the depth for iPhone placement by 3mm, ensuring that the phone with a case does not protrude noticeably when placed in the dock.
UPDATE:
I have confirmed that the size differences between the iPhone 12 to 15 models are minimal (as per the table below). Therefore, I updated the dock to accommodate the better iPhone models and adjusted the size to better support most iPhones with cases.
iphone Model | Length (mm) | Width (mm) | Tolerance Length (mm) | Tolerance Width (mm) | File name |
iPhone 15 Pro Max | 159.9 | 76.7 mm | 165 | 82.6 | iPhone 12-15 max with case |
iPhone 14 Pro Max | 160.7 | 77.6 mm | |||
iPhone 14 Plus | 160.8 | 78.1 mm | |||
Phone 13 Pro Max | 160.8 | 78.1 mm | |||
iPhone 15 Pro | 146.6 | 71.6 mm | 153 | 78 | iPhone 12-15 with case |
iPhone 15 | 147.6 | 71.6 mm | |||
iPhone 14 Pro | 147.5 | 71.5 mm | |||
iPhone 14 | 146.7 | 71.5 mm | |||
iPhone 13 Pro | 146.7 | 71.5 mm | |||
iPhone 13 | 146.7 | 71.5 mm |
Comment & Rating (249)