WELCOME!

I envisioned an alternative to the wall mount from a well-known, large Swedish furniture store, which I could entirely create myself using a 3D printer.

And at any time!

It was essential that I could rearrange the individual elements at any time and repeatedly.

I also wanted to maintain all the freedom I needed when it came to color design.

Currently, there are two different versions that can be chosen depending on the printer size. The rectangular and the Octo version (cannot be combined with each other)

The individual elements, such as hooks, boxes, clips, etc., can be inserted anywhere. All attachments are placed on one or more HOLDERS. The wide HOLDER can be used for particularly heavy attachments.

The individual elements can be downloaded individually depending on the model (for clarity).

Important! The position on the print bed is crucial. Holders should be printed horizontally to increase stability. (direction of the printed lines)

I chose PLA+ as the material.

There are always new expansions!

I happily accept constructive criticism and incorporate it into my following projects =). Questions? Wishes, suggestions?

Sam

German:

I wanted an alternative to the wall mount from a well-known, large Swedish furniture store, which I could entirely create myself using a 3D printer. And at any time!

It was important to me that I could rearrange the individual elements at any time and repeatedly. Also, in terms of color design, I wanted to retain all the freedom I needed.

Currently, there are two different versions, which can be chosen depending on the printer size. The rectangular and the Octo version (not combinable with each other)

The individual elements, such as hooks, boxes, clips, etc., can be inserted anywhere. All attachments are placed on one or more HOLDERS. The wide HOLDER can be used for particularly heavy attachments.

The individual elements can be downloaded individually depending on the model (for clarity).

Important!

The position on the print bed is crucial. Holders should be printed horizontally to increase stability. (direction of the printed lines)

I chose PLA+ as the material.

There are always new expansions!

I happily accept constructive criticism and incorporate it into my following projects =)

Questions? Wishes, suggestions?

Sam