This is just a simple Walking Man magnet, which I use to track daily walking activity for a family member going through PT.  The magnet is very small (15.3 x 15.3 x 4.9mm), so I can place them on a calendar page, and they use a 6x3 Cylinder Magnet.  The magnets will press in, but I added a dab of superglue to make sure they say put.

I used the svg from the “walking icon” by a.l.e (from openclipart.org) , as the design for the walking man, and then designed the rest of the magnet from scratch.  

I printed these using a 0.4mm nozzle (and set “Arachne” as the “wall generator” in the slicer).  I think they would look better with a 0.2mm nozzle though.  I included a Bambu Studio 3mf Profile with several of these set up for printing (using a 0.4mm nozzle).

If you are printing without using the 3mf profile, then both models will need to be loaded into the slicer together (select both and drag them onto the plate).  Then a box will pop up asking if you want to load both models as a single object (select yes to the following box that pops up):

Then you can just select the color of each part from the “Objects” pane in the slicer.

If you find these models useful, please post a like or a comment with some pics of your prints.

You can find the other things I'm working on at my blog here. You can also follow me on Printables or MakerWorld, to see what new stuff I post. If you would like to support my work, you can Buy Me A Coffee using this link:

https://www.buymeacoffee.com/mystoopidstuff