i can Upload a version for 32mm and will notify you later 👍

domi_schmidt95

Oké very much thank you, I Will wait for it, meanwile i study on fusion 360 to understand how .🙇‍♂️

UpdeRed

hello I like this model.
but I am a newbee on 3D printing!
how can I change de Connect diameter to 32 mm?
 greetings. piet d D

By tightening the cover, the rear part expands.

Great design, super attractive, functional design- though, I admit I’m stuck on exactly HOW it goes together and stays in the tube. if you could explain that would be helpful. thank you-(sorry if I’m missing something)

SmonstrDesign

0.12mm layer, 6 walls, 25% infill

Peti1973

StillMT

M3 Carbon Steel Hex Nut (20PCS) - AB005

M3x12 SHCS Machine Screw (20PCS) - AA038

cover

IMG_3273.JPEG

IMG_3274.JPEG

2024-09-07_37329a009738e8

plate_1.png

Mit diesem Mount könnt ihr sehr einfach euren AirTag an eurem Fahrrad verstecken.Die Teile sind alle so ausgelegt das sie schnell und einfach ohne Supports gedruckt werden können.&nbsp;Der Mount ist für die Bohrung am vorderen Federbein. Die hier hochgeladene Version ist für den Durchmesser 28.00.Dazu ist der Mount so konstruiert das durch das festziehen der Schrauben der innere Körper den außen Durchmesser nochweiter aufweitet (ca. um 0,40mm), dadurch können Drucktoleranzen ausgeglichen werden.&nbsp;Ich habe von allen Komponenten STEP-Dateien hochgeladen damit ihr den Durchmesser selbst auf eueren benötigten anpassen könnt.Solltet ihr damit Probleme haben könnt ihr mir auch eine Nachricht mit euerem benötigten Durchmesser schicken und ich laden diesen noch nachträglich hoch.&nbsp;Für die Montage wird benötigt<ul><li>2x M3 Muttern</li><li>2x M3x12 Schrauben</li></ul>&nbsp;With this mount you can easily hide your AirTag on your bike.The parts are all designed so that they can be printed quickly and easily without supports.&nbsp;The mount is for the hole on the front shock. The version uploaded here is for the 28.00 diameter.The mount is designed in such a way that the inner body expands the outer diameter even further (by approx. 0.40mm) when the screws are tightened, allowing pressure tolerances to be compensated.&nbsp;I have uploaded STEP files of all components so that you can adjust the diameter to your needs yourself.If you have problems with this, you can also send me a message with your required diameter and I will upload it later.&nbsp;For the assembly you need<ul><li>2x M3 nuts</li><li>2x M3x12 screws</li></ul>

With this mount, you can easily hide your AirTag on your bike.The parts are all designed so that they can be printed quickly and easily without supports.&nbsp;The mount is designed for the hole on the front shock absorber. The version uploaded here is for a diameter of 28.00.The mount is designed in such a way that the inner body expands the outer diameter even further (by approx. 0.40mm) when the screws are tightened, allowing pressure tolerances to be compensated.&nbsp;I have uploaded STEP files of all components so that you can adjust the diameter to your needs yourself.If you have problems with this, you can also send me a message with your required diameter and I will upload it later.&nbsp;For assembly, you will need:<ul><li>2x M3 nuts</li><li>2x M3x12 screws</li></ul>

Print Profile(1)

Description

Bill of Materials

Comment & Rating (14)

License

Related Models

Headset Stand - Suspension Design

Under monitor pen and pencil holder

Lateral Spool Holder with ptfe for P1P P1S X1C

Jewelry holder

AirTag holder for Suspension