Truck with snap-on/snap-off trailer and containers by PiVaBa

PiVaBa

Toys & Games>Other Toys & Games

GIF

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer standard quality, 2 walls, 15% infill

Designer

10.9 h

5 plates

4.9(21)

0.2mm layer, 2 walls, 10% infill

Designer

3.4 h

1 plate

5.0(15)

0.08mm layer high quality, 2 walls, 15% infill

Designer

22.5 h

4 plates

5.0(10)

Open in Bambu Studio

Boost

822

1334

185

781

237

Released

Description

My son came up with the suggestion to create a truck after I created a gantry crane with containers for him. Who am I to say no?

Update 5th of September 2024: minor fixes and improvements

Features

inspired by the classic Peterbilt 379
fully printable and to be assembled with concealed swallowtail connections
requires (almost) no support to print, except for the air filter housings located at the hood
trailer and containers can snap on and off mechanically
rugged design with rounded edges

Also check out my related design, the Gantry Crane which has been updated with compatible snap-on / snap-off containers https://makerworld.com/en/models/537920#profileId-455087
Gantry crane with snap-on / snap-off container

Troubleshooting:

Assembly: please follow the assembly instructions closely. Some pieces can be hard to remove when assembled incorrectly or in the wrong order
Tight fittings: some of the swallowtail fittings are tight on purpose. If you experience challenges during assembly, apply little bit of force and wiggle the piece while sliding it in the fitting
Bed adhesion: some of the plates have pieces pretty close to the bed’s edges. This can result in poor bed adhesion and curling edges on your print. Make sure to clean your bed before printing and if need be, reduce print speed to 50%. This can be done on the printer display

Assembly:

Boost Me (for free)

Please boost if you like this!

Documentation (1)

Assembly Guide (1)

Assembly.pdf

Comment & Rating (185)

@Myshka2024

Boosted

I am looking to print this but the truck cabin seems to be missing all the parts for the trailer are there, where do I find the cabin?

The designer has replied

@StudioRC

Hi @Myshka2024, thanks for your interest in the model. You can print the cabin from the separate 0.08mm layer high quality bodywork, 2 walls, 15% infill print profile. It contains all the bodywork for the high detail version.

@Myshka2024

Boosted

Replying to @StudioRC :

where do I find said profile?

@StudioRC

Replying to @Myshka2024 :

This is the one I’m referring to, you’ll see it when you press “prepare to print” in the Bambu App

@Norkius

Boosted

Print Profile

0.2mm layer standard quality, 2 walls, 15% infill

Came out looking great and was easy to assemble. I had one issue with bed adhesion that I take full responsibility for, if anyone happens to notice it.

The designer has replied

@StudioRC

thank you

@Norkius

Boosted

Replying to @StudioRC :

You got it! Hope to add some images and words later on but all prints went well.

@user_720498765

You can deal with the stickiness of the bed by using hair spray. It helps a lot :)

@user_2062976109

Boosted

Print Profile

0.08mm layer high quality, 2 walls, 15% infill

awesome model, everything fitts good without any need for glue. I printed it scaled down to 77% to match the scale of hot wheels cars. For the grill and the hub caps I used a small hammer to tap them in. Now just some paint and it will be perfect.

The designer has replied

@StudioRC

Wow, that looks great! I would love to see the painted version

@user_559324302

Hello, it looks great, ask how you made the pieces fit together, I couldn't do it, it cost a lot and pieces broke.

@user_2062976109

Boosted

Replying to @user_559324302 :

I had no problem with the big pieces, a couple of the small pieces I did clean up a bit with a sharp knife to make them fit easier. It can help to clean out the slots a bit to round the edges a bit.

@MrMoose

Print Profile

0.2mm layer standard quality, 2 walls, 15% infill

the wheels came out good but the “shiney parts” was painful especially with the exhaust pipes and I couldn’t deselect any parts on the plate which meant if one part failed and the rest came out good I had to reprint the entire plate and waste time and filament

The designer has replied

@StudioRC

Thanks for bringing this up. It is possible to ungroup the parts using the Bambu desktop application and reprint only one, but I will upload the ungrouped print profile today to resolve this. Can you please elaborate on the challenges you faced with the exhaust pipes or other parts? That way I can look into this further

@StudioRC

I have updated the print profiles. For future reference, I'm including a screenshot of how you can split a component to parts in the desktop application to avoid having to print everything

@MrMoose

Replying to @StudioRC :

basically at the tip of the exhaust had a space surface area on the build plate ehicg made it easy for it pop off mid print and ruin the exhaust. brins would be nice and some support under the pipe to help support it while it probts

@SnowFox

Boosted

Print Profile

0.08mm layer high quality, 2 walls, 15% infill

Very nice and elaborate model. My sons are very happy with it, I have to print the second one because they fight over it :D I had a problem with the Bambulab A1 while printing the "Shiny thing", I solved it with BRIM.

The designer has replied

@StudioRC

thanks for sharing, the endresult looks great! I’ve had similar issues when printing parts close to the bed’s edge but I was able to resolve them following instructions from Bambu’s excellent support pages: https://wiki.bambulab.com/en/knowledge-sharing/printed-model-warping . More specifically, the cooling settings under 2. proved to be very effective

@SnowFox

Boosted

Replying to @StudioRC :

Thanks for the advice, I'll try it next time I print :)

@blaze0808

Replying to @StudioRC :

For causality I found your response. Thanks a lot for sharing this information, It's a lot of interesting. Thanks!

@user_559324302

Hi, here are some photos of how it turned out. Some parts broke when fitting together. I don't know if it was due to lack of filling. Now I will make another one with more filling, but this one turned out like this.

The designer has replied

@StudioRC

Thank you for sharing, looks good! Can you specify which parts broke off? That way I can look into design improvements

@user_559324302

Replying to @StudioRC :

Thank you, don't worry, the design is perfect, it was my bad configuration.

@Keksbeisser

Boosted

An incredibly good model. No glue, no screws, everything fits perfectly. Sturdy! A very nice new toy, my son is very happy with it. Thank you for this model!

The designer has replied

Show original

@StudioRC

thank you for boosting!!

@Keksbeisser

Boosted

Print Profile

0.2mm layer standard quality, 2 walls, 15% infill

Awesome Model, profile works great. Thank you, my son loves his new toy!

The designer has replied

@StudioRC

thanks for rating and sharing the picture 🤩

@JaBBsn

Boosted

Print Profile

0.2mm layer standard quality, 2 walls, 15% infill

A fantastic project and thank you for sharing it with everyone! :-) I boosted it

The designer has replied

Show original

@StudioRC

thanks for the support!

@CurlyFry1890

Boosted

Print Profile

0.2mm layer standard quality, 2 walls, 15% infill

Came out great! didn't follow the instructions exactly and had to reprint some parts. happy how it turned out though!

The designer has replied

@StudioRC

Looks perfect 👌 thanks for sharing the pics!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(3)

Description

Documentation (1)

Comment & Rating (185)

License

Related Models

SKADIS CONTAINER WITH PIGGYBACK

Snap on Gengar - Halloween Fairy Light Upgrade

Pineapple Container.

Strong Snap Buckle