I needed something to mount my work laptop and my workstation under the cabinet above my desk. I couldn't find anything that took into account the 1.5" recess under my cabinet to allow for the laptops to slide in. I ended up drawing this out and it works well for me. It easily holds the work Dell Latitude 5520 and my Dell Precision 5490 workstation. The lightning ports and display ports are still accessible and allow me to hook each to their dock so I can use both on my monitor and my desktop using PBP. Mixing up the mouse for each computer is something I am still working on. You will need to print (3) of these so you have one on each side of the laptop and then the third is a positive stop in the back. I mounted using #8 taper head machine screws through the cabinet to large washers and lock nuts as I didn't trust the cabinet material. All printed in PETG and have had no issues and I load and unload the work laptop each day with the workstation staying in place most of the time. Hopefully this fills a need for you.