Fape : A Device To Help Quit Vaping by DezyNaps

DezyNaps

Tools>Medical Tools

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.16mm layer, 2 walls, 20% infill

Designer

2.7 h

1 plate

4.8(51)

Fast print, adjustable layer height (0.24>0.08)

1.3 h

1 plate

Open in Bambu Studio

Boost

287

388

766

549

Released

Description

Do you want to stop vaping? Having troubles trying to quit? I know I sure do!

I modelled a device that would hopefully help me and many other people to get a handle on their vape situations. With this device I hope to improve that situation by having the ability to have a small device that has the same feel as a regular vape device and the same puff feel without any harmful chemicals or juice entering your body. Instead you're getting a healthy puff of air!

I've been vaping for quite sometime now and I am wanting to quit badly as I don't want to continue inhaling such harmful chemicals into my lungs and body and I know the struggles and difficulties when it comes to quitting. For me personally, I find my self always reaching for my vape even when I don't have my vape on me, I've gotten just so used to that motion of grabbing it and taking a rip off of it. So I decided to model a device that will have that same motion and feel of my regular device but instead inhale nice healthy air!

These models were printed in PETG for more heat and sun resistant if you were to leave it out in the sun or in your car. Other materials will work just fine too! There's also the ability to add custom text to you Fape device too!

Please leave a comment on things I should change and how your print went!

Boost Me (for free)

Check out my Cults page for some of my other models aswell! https://cults3d.com/en/users/DezyNaps_/3d-models

Comment & Rating (77)

@user_806450901

great print, used elegoo rapid pteg. I like to put one drip of vape juice into the bottom just to get a slight flavour.

The designer has replied

@DezyNaps

I'm happy the print turned out great for you! And that's a great idea never thought of that!

@user_2185019954

Boosted

I was no edicted to a vape but now I’m edicted to this fape

@Jason11166

Print Profile

0.16mm layer, 2 walls, 20% infill

kinda hard to remove the supports from the lettering

@DezyNaps

Yeah printing it in petg the supports are kinda hard to remove. With pla it's more easier. Try changing support settings or manual supports to reduce the amount of supports used if you're having difficulties.

@user_553337233

Boosted

Print Profile

0.16mm layer, 2 walls, 20% infill

Excellent design! The Fape printed flawlessly with Bambu Basic PLA, with perfect bed adhesion and a smooth finish. The entire print took just 2 hours, and I had zero issues throughout the process. Bonus as I could change text and personalise. A well-thought-out design that my husband says is great to hold and use. Huge thanks to the designer for sharing this—highly recommend and hope it helps husband break this habit so he can breathe better and live better

@DezyNaps

Thank you so much for your feedback! and stay tuned for version 2 I plan on making it sometime this week. It will be even better and less filament cost and time printing! I also plan to add adjustable airflow on version 2 aswell! Thank you so much for your feedback once again 😊

@user_2256837343

Boosted

Print Profile

0.16mm layer, 2 walls, 20% infill

nice

@user_415980041

Print Profile

0.16mm layer, 2 walls, 20% infill

prints great, the inhale does mimic a vape really well

@TerenceChill

Boosted

Print Profile

0.16mm layer, 2 walls, 20% infill

Extremely helpful Could be further developed Has potential for additional features

Show original

@djelton

Print Profile

0.16mm layer, 2 walls, 20% infill

Good idea! Printed with Bambu PLA Basic with my own settings for adjustable layer height, so I can print it fast and still get a detailed mouthpiece. I'm not sure about the function, I'm trying to force myself use it, but something feels 'off' (not with the print, just the idea of non-vape). So I'm trying to push myself more to use it ;)

@droproots

Print Profile

0.16mm layer, 2 walls, 20% infill

@user_993377835

Print Profile

0.16mm layer, 2 walls, 20% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

121

Print Profile(2)

Description

Comment & Rating (77)

License

Related Models

Chopstick Helper

Piano Sheet Helper

Helping Feet

LEG0 Minifigure Night Vision Device brick