Project: Pin Up.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 120x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 2.8mm

Filaments Used:
PLA Smart Recycled Black Transmission Distance: 0.5
PLA Smart Recycled White Transmission Distance: 5.7
PLA Smart Recycled Red Transmission Distance: 4.4
This print uses 3 unique filaments

Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Black
At layer #10 (0.88mm) swap to White
At layer #22 (1.84mm) swap to Red
At layer #31 (2.56mm) swap to White for the rest.