Shelf Bracket Climbing / Regalhalter Klettern

Copyright Claim

Shelf Bracket Climbing / Regalhalter Klettern

Boost
8
14
1

Print Profile(1)

All
P1S
P1P
X1
X1 Carbon
X1E
A1
A1 mini

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
1.2 h
1 plate
5.0(1)

Open in Bambu Studio
Boost
8
14
1
0
14
4
Released

Description

To attach the supports to the wall:

  • 2 holes (countersunk head screw) diameter 4mm
    • Length of the screws depends on the respective dowel.

To mount a shelf:

  • 3 holes (countersunk screw) diameter 4mm
  • Length of the screw depends on the shelf board

In my case, I used an oak shelf with a tree edge, but you are free to be creative here.

 

There is a separate holder for each side of the shelf, but you can also use the same one for both sides.

 

No support structures or other special settings are required for printing.


The AMS is advantageous for visually setting off the outline of the climber. The color can be changed in the slicer as desired. Single-color printing is possible, but the outline of the climber is not emphasized as much.


Have fun printing.

Comment & Rating (1)

Please fill in your opinion
(0/5000)

Print Profile
0.2mm layer, 2 walls, 15% infill
Nice Print, i printed it in PETG an they came out real good.
0
Reply
No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.