This is a significant remix of the “Big Santa L3gos  Inspired ” Files by Quist on Printables (https://www.printables.com/model/329527-big-santa-l3go-inspired) (who was inspired by others as well)

This guys is about 20 Inches tall ( 19.5 inches give or take your measuring tape

These were actual individual files without a print profile. I arranged for the optimum 
print bed size to avoid height issues with bumping prints as well as maximizing print space and time.
Also played with and tested infill/ walls to ensure good structural integrity and ease of removing 
supports.

I pre-painted plate 2, 4 & 6 items as well to save others time (you can always change those colors easily)
About 38 pieces to include extra connecting pins JIC

Total time for all pieces: approx 47 hours and 40 min
Plt 1- 10 hrs 58 min
Plt 2- 8 hrs 16 min
Plt 3- 10 hrs 32 min
Plt 4- 4 hrs 52 min
Plt 5- 7 hrs 2 min
Plt 6- 10 hrs 48 min
Plt 7- 4 hrs 9 min

P1P/ Bambu Basic PLA
(I turn off Aux fan but the file profile has it on at 20%)

P1P / .04 / Textured PEI

.2mm
Iron topmost surface
Classic walls
3 wall loops
3 top shell
3 bottom shell 
10% Gyroid infill
Prime tower enabled : Normal /Snug Threshold 5
Brim/Bed Adhesion: Outer Brim Only /Brim width 4/Brim object gap .35
flush into infill/object turned on for Pegs on plate 6 (that can be unchecked if you want)

First layer filament seq.Profile is set to Auto but can be 
changed to whatever as plate 6 is the only multicolored print and print seq is not likely to 
cause issues