Hello Fellow Hobbyists, Friends across the US and beyond, You can ALL now show off this comical yet brilliant design brought to you by a fellow designer, Keith aka LoFi Layers and myself, Lance “Cracka”. New to the Hueforge community and love designing and creating these amazing prints and now wish to share some of them with you. =)

This design was way too cool not to share with you all so here it is!! I hope you enjoy the first of many “Timeless Design” set from my collection of creativity. There is more to come in this set so stay tuned!!!

I will update this post with links to the rest of the designs in this set once they are posted and made public.

Please do comment and share the love and support by boosting and rating this model and print profile.

There are also 200x200 stl and 100x100 stl's with instructions for manual swapping colors.

Happy Printing and see you soon with more awesome designs! Be sure to hit that Follow Button and stay tuned! <3

NOTE: My Profiles use a HRM (Height Range Modifier) So that the first few layers print thicker to make the print time decrease, and help the Hueforge be more stable. However, you may print without this adjustment at the cost of increased print times.

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Print Instructions: (Note: Downloadable Copy of Instructions Listed Below!)

Project: Gunshine State.hfp
 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.88mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Blue Gray
At layer #12 (1.04mm) swap to Jade White
At layer #21 (1.76mm) swap to BambuLab Green
At layer #24 (2mm) swap to Jade White for the rest.
 

Follow me everywhere @CrackaFPV, Also stay tuned for more awesome designs and commercial license to resell will be available soon! Thank you for stopping by and hope you enjoy this amazing slice of home, aka; The Gunshine State! Go Bucs!! ;)

--------------

The frames I prefer to use are the Square Corner “v2” friction fit frames made by Canadian Gamer, no glue, slight bend and they pop in. (Patent Pending HAHA) Download this frame for yourself! 

You can find them here in both 100x100 and 200x200 sizes:

https://makerworld.com/en/models/559845?from=search#profileId-479071

Check out these other frames I use, also made by Canadian Gamer:

400x400 Displate Set:

https://makerworld.com/en/models/619191#profileId-543110

400x200 Displate Set:

https://makerworld.com/en/models/618484?designId=618484#profileId-542281

600x200 Displate Set:

https://makerworld.com/en/models/627972#profileId-552610

--------------

Commissioned work created by LoFi Layers at - https://www.fiverr.com/s/Ayd7z14

Special thank you to Keith for this design, great job my friend!!!

Be Sure To Follow Keith and LoFi Layers Here As Well! - https://makerworld.com/en/@LoFi_Layers

--------------

Thank You For Stopping By, See You Soon! <3

-Lance “Cracka”