Flatcar Wagon with Container (Print in Place) by jdormer9

jdormer9

Toys & Games>Other Toys & Games

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

5.7 h

2 plates

5.0(9)

Colored - 0.2mm layer, 2 walls, 15% infill

Designer

10.7 h

1 plate

Open in Bambu Studio

Boost

149

Released

Description

Extension for locomotive. Flatcar wagon with containers. This model is designed to be printed without assembly.

The wheel bases are gently wound onto the center of the locomotive. The diameter of the wheels is also suitable for the bricks Train.

It is suitable for a Prusa MINI, A1 mini printer or other small printer where the model rotates 45 degrees.

US Diesel Locomotive

Main locomotive: link here

Couplers

Couplers are also available for this model to connect other locomotives (possible future models): link here

Comment & Rating (11)

@PLHuney

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

These designs/prints are incredible, can't wait to add more to the collection.

@kjellhov

The container slid off the wagon to easy. It should have some sort of attachment/snap on. The lid also need a tighter fit at is falls open. I love the design and its beautiful but to play with and change out the containers its need this fix. I ended up glue on some velcro as a solution.

The designer has replied

@jdormer9

You're right, the container falls out easily. That was the intention as well, I wanted something that could be easily swapped for other things (vehicles in the future). I also want to improve the door closure, I'll look at the snap on wagon as well.

@user_1295461757

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Like it

@ross3D

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_616424874

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_3114929377

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

@jumpingjelly

Print Profile

0.2mm layer, 2 walls, 15% infill

@MachIV

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

@MrBaker

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

@b.hurt

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.