Stand for iPad & Tablets Remixed by A_ilterish

Remixed by

A_ilterish

Household>Other House Models

IP Report

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 5 walls, 20%~30% infill

Designer

11.5 h

2 plates

4.9(71)

0.28mm layer, 2 walls, 10% infill

4.7 h

2 plates

4.9(16)

0.28mm layer, 2 walls, 10% infill (screw 20% infill)

7.9 h

5 plates

4.5(2)

Open in Bambu Studio

Boost

595

1162

229

147

1.4 k

657

Released

Description

Boost Me (for free)

✨ First, I would like to thank for Peter Martin

This is a 3D-printable, adjustable, and stylish stand designed for iPads or other tablets.🖥️
This stand allows you to use your tablet in the most comfortable and ergonomic position. Perfect for both work and play! 🖥️📱 The stand’s minimalist design adds a modern touch to your workspace, while its sturdy construction ensures your tablet stays securely in place. Additionally, with its adjustable angles, you can set your tablet at the desired height and angle for optimal use. 👌✨

This stand is completed with a total of three parts, and you can print it in different colors to add a beautiful aesthetic touch. 🎨🔧

Updates:
31.08.2024 - #01 : Added a hole for charging cable

I would be happy if you look at the links below:

Instagram: https://www.instagram.com/a.ilterish/

Cults3D: https://cults3d.com/en/users/Poly_Infinity/3d-models

Printables: https://www.printables.com/@ilterish_843470/models

MakerWorld: https://makerworld.com/en/@A_ilterish

m1 - m2 macbook air stand

Comment & Rating (229)

@Josueis

Print Profile

0.2mm layer, 5 walls, 20%~30% infill

i did it for a portable monitor and works like a charm 😄 thank you!

@A.ilterish

What? wait wait, How many inches is this screen?

@Josueis

Replying to @A.ilterish :

Portable Monitor, 15.6 inches

@A.ilterish

Replying to @Josueis :

wow, So cool, does it enough stable ?

@neugebauer.manu

Print Profile

0.2mm layer, 5 walls, 20%~30% infill

It was perfect, I had to adjust it a little, but it's great

Show original

@A.ilterish

Thank you for your rating. Could you share the print pictures ? 🌿 I would greatly appreciate it if you could follow me on MakerWorld and consider boosting my models.

@neugebauer.manu

Replying to @A.ilterish :

Okay, I have added it to the evaluation

Show original

@A.ilterish

Replying to @neugebauer.manu :

wow it looks very nice, Could you share the the part you added ?

@david3d

Very useful impression, perfect for my tablet, nothing to complain about

The designer has replied

Show original

@A.ilterish

Wow 🤩 it looks amazing. I would greatly appreciate it if you could follow me on MakerWorld and consider boosting the models.

@mr.stello

Boosted

Print Profile

0.2mm layer, 5 walls, 20%~30% infill

great for smaller iPads. doesn’t really work with the 12.9 inch. but overall a great design.

@A.ilterish

Thank you for your rating. 🌿 I would greatly appreciate it if you could follow me on MakerWorld and consider boosting my models.

@PotatoPrints3D

Boosted

I know this is a remix but I’m loving this model. I like the height it gives the iPad no need for a riser. I used my own profile to decrease print time and it came out perfect. Original profile said it would take 11+ hours on 2 plates. I cut it down to 4.5 on 2 plates. 👍