Tips for printing:

• Supports: Yes (tree)
• Layer height: 0.16mm (optimal)
• Wall loops: 3
• Infill: 15%
• Seam position: back
• Wall generator: -
• Detect thin walls: -
• Brim: Yes

Colors and filament I used (3 Color Version):

• PLA / White - for the skull
• PLA / Orange - for the pumpkin
• PLA / DarkGreen - for the stem

Or decide for yourself which colors and how many you want to use!

When you decide to print my multicolor Pre-Sliced (3mf file) for BambuLab I would recommend printing several models at once, not just one, to reduce waste!

---------------------------------------------------

Multiple Parts:

Tips for printing:

• Supports: Yes (tree)
• Layer height: 0.16mm (optimal)
• Wall loops: 3
• Infill: 15%
• Seam position: back
• Wall generator: -
• Detect thin walls: -
• Brim: Yes

Colors and filament I used (3 Color Version):

• PLA / White - for the skull
• PLA / Orange - for the pumpkin
• PLA / DarkGreen - for the stem

Assembly:

(1.) Find the place where the skull fits best into the pumpkin and press it in. If you want, you can also glue it in place.

(2.) Glue the stem

(3.) Finished!

Happy printing!