Description and assembly

The model contains these objects: 5 pots, soil, 3 stems and 6 leaves.

Assembly is very easy. No magnets or glue are needed. Soil goes in the pot, stems go in the soil and leaves go on top of the stems.

The assembled model has approx dimensions: 15x15x30cm.

About the model

The model is divided into several objects:

• Plant pot – Dimensions: 65x65x55mm.
• Soil – Contains 3 holes for stems. You can add additional holes in your slicer as negative parts.
• Leaves – Leaves are divided into parts for easy coloring. While printing the leaves there will be 12 color changes. Approx leaf dimensions are: 90x114x2mm.
• Stems – Supports are needed only for the tips of the stems.

Colors:

• For the white princess color scheme:
  • Bambu Lab ivory white matte
  • Bambu Lab dark green matte
  • eSun matcha green
• For the pink princess color scheme:
  • AzureFilm burgundy pink
  • Bambu Lab sakura pink
  • Bambu Lab dark green matte

Print profiles and suggestions

Printing suggestions:

• Use slightly higher nozzle and bed temperature for the first layer when printing leaves to have fewer gaps between colors
• Print slower for better quality, set initial layer and initial layer infill to 50 mm/s, outer wall, inner wall and top surface to 100 mm/s
• Supports are needed only for the tips of the stems.

Edit 12/23/2024: Added printing profile for magnets size 5x1mm. Now you can use this model with magnets!

Commercial Use

This model is only available for non-commercial use, you can print it for yourself or as a gift for others, but you may not sell or alter the model. If you are interested in obtaining a commercial license please visit my Patreon store: https://patreon.com/noordinaryleaf