Voronoi Poop Bag Dispenser

Copyright Claim

Voronoi Poop Bag Dispenser

Boost
32
69
4

Print Profile(1)

All
A1 mini
P1S
P1P
X1
X1 Carbon
X1E
A1

0.24mm layer, 1 walls, 15% infill, Supports
0.24mm layer, 1 walls, 15% infill, Supports
Designer
6.8 h
1 plate
4.3(3)

Open in Bambu Studio
Boost
32
69
4
0
36
21
Released

Description

The Voronoi Poop Bag Dispenser

 

It can hold up to 8 thin poop bag rolls. 

 

You need to know this before printing:

IT USES A LOT OF SUPPORTS !!!

And I know what you're thinking ( why? it's a Voronoi, Voronoi doesn't use supports ) but i did a test print before printing the whole thing and it had some very nasty overhangs so it needs supports and not only there are a lot of supports but the supports pass through the holes and continue inside the print so you need long pliers to take them out. 

 

So, if you don't like supports, then this is not for you. It took me almost half an hour to remove all the supports.

 

BUT REMEMBER 

 

It's always different depending the type and color of the filament. ( white PLA is usually dyed with Titanium Dioxide which is slightly abrasive and also doesn't bond to the plastic as well as normal pigments )

 

I also put a flat spot at the back if you want to double tape it to the wall.

 

I strongly encourage people to create other print profiles that use less supports.

 

Happy printing !!! 😉👍😉

Bill of Materials

Maker’s Supply Kits and Parts
Buy Now
Download BOM

Comment & Rating (4)

Please fill in your opinion
(0/5000)

Print Profile
0.24mm layer, 1 walls, 15% infill, Supports
really hard getting all the supports out, lots of ragged edges
The designer has replied
0
Reply
yes i know did you read the description, i already said that it's hard to remove the supports i am really sorry for that but thank you for sharing 😊
0
Reply
Print Profile
0.24mm layer, 1 walls, 15% infill, Supports
cut the bottom and made make bursh holder
0
Reply
Print Profile
0.24mm layer, 1 walls, 15% infill, Supports
0
Reply
No more