Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 185x242.11mm in size
You may print at higher layer heights below the Min Depth of 0.96mm
The Max Depth is 2.7mm and the Actual Depth is 2.4mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA PolyLite White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #15 (1.28mm) swap to Red
At layer #16 (1.36mm) swap to Blue Gray
At layer #18 (1.52mm) swap to Ash Gray
At layer #20 (1.68mm) swap to White for the rest.