Pencil Holder Ruler by FlorinV

FlorinV

Household>Office

GIF

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.12mm layer, 2 walls, 15% infill

Designer

1.2 h

1 plate

5.0(6)

No AMS 0.2mm layer, 2 walls, 15% infill

1.1 h

1 plate

Open in Bambu Studio

Boost

Released

Description

Print-in-place ruler with pencil holder and mechanism for ejecting the pencil.
NO AMS needed for printing the ruler MM details. Just a color swap.
No hardware needed.
17.5 cm ruler.
Also has grooves from 0-3" (inch) with full and half inch marks.
The max diameter of the pencil to be stored inside the ruler is 7,8mm. I've tested 4 types of hexagonal pencils and all worked fine.

My profile has a modifier for the last lines of the print, to slow it down and be able to better print the details of the ruler.

I've also added brim to be sure the corners are not lifting at all. You can try without brim, but if one corner is starting to lift, the ruler details on top will most probably look a bit washed on that corner.

Boost Me (for free)

Comment & Rating (14)

@BamBamDesign

Boosted

Print Profile

0.12mm layer, 2 walls, 15% infill

Cool clever print! Profile is good, the hole is a bit tight, but works. Thanks Florin

The designer has replied

@FlorinV

thank you !!! 🍻

@faaarmer

Boosted

Print Profile

0.12mm layer, 2 walls, 15% infill

absolutely brilliant. well done.

The designer has replied

@FlorinV

🍻

@Nicole2808

Print Profile

0.12mm layer, 2 walls, 15% infill

The designer has replied

@FlorinV

thank you for your review!

@user_2040429502

this is amazing! definitely printing one for myself. I was wondering if you might be able to make one with inches on it? that’d make it easier for kids to use in school here. man, I wish we just switched over…

The designer has replied

@FlorinV

thank you for your apreciation! maybe o would do one version in inch also, i will let you know if so.

@faaarmer

Boosted

Very clever and fast print.

The designer has replied

@FlorinV

thank you ! glad you like it!

@chaoticorb

Print Profile

0.12mm layer, 2 walls, 15% infill

The designer has replied

@FlorinV

thank you!

@Cbauer39

Print Profile

0.12mm layer, 2 walls, 15% infill

@user_2052305985

Boosted

Print Profile

0.12mm layer, 2 walls, 15% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.