Knight Chess Piece Impossible Passthrough by Atro

Atro

Toys & Games>Other Toys & Games

GIF

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

3.9 h

2 plates

4.7(93)

Open in Bambu Studio

Boost

478

798

124

1.2 k

749

Released

Description

NO AMS NEEDED

Printed in two parts

Tree supports needed

Boost Me (for free)

I made the full set :)

impossible

impossible cone

impossible fidget

impossible passthrough

impossible passthrough fidget

impossible passthrough sphere

helix impossible passthrough

Comment & Rating (124)

@WLMCr8s

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Updating review- with the feedback we were able to make the needed changes and it works great now.

(Edited)

The designer has replied

@Atro

If your printer prints it too tight then try making the X-Y contour compensation either -0.4, -0.45 or -0.5

@WLMCr8s

Boosted

Replying to @Atro :

Thank you, we will try that. We love the design and want to get it right.

@spydermixx

Replying to @Atro :

On both pieces or just one?

@Xiao_Zhi

It all went well until this part. Don’t know why.

@user_202904844

We had this issue also

@Kady3DPrinting

My make https://kady3dprinting.com/model/3d-printed-knight-chess-piece-impossible-passthrough

@M_Jorge

Boosted

What I want it a nice travel chess set where the White pieces stack inside the black pieces, and where when separated it is easy to identify the pieces. This knight is great because unlike some other passthru knights, both the inner and outer pieces both look like knights. This knight was rather large compared to the other passthru chess pieces I downloaded (by GemoGens), so I downsized it to 7cm tall. Unfortunately then the inner piece would not pass thru the outer. I found Atro's very good advice to adjust the X-Y contour compensation (-0.25 was perfect) and the printed inner piece slid through the outer like butter. Unfortunately, I then painted the pieces, and found out that X-Y contour compensation will not work on painted pieces. I would really like to custom color the pieces so that they are more easily identifiable and because I like the look. Is there any way to save the change in dimension of the inner piece such a way that I could then color it

The designer has replied

@Atro

Is you use AMS for the inner piece then the XY-compensation will not work, I'd suggest making the inner pieces different colors than the outer pieces so that when you seperate them, they will be noticeably different. but make sure that that inner piece is one color.

@3dprint8735

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

👍

(Edited)

@Silverlight

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

top

@D_1uxe

Print Profile

0.2mm layer, 2 walls, 15% infill

Nice model

@iamsy

Print Profile

0.2mm layer, 2 walls, 15% infill

I was using filaments from two different brands, and I don't know why the red part has three breaks in the middle, which makes this a failed print, but I really like the design, thank you.

Show original

@len1989

An outstanding design!

Show original

@raven_ultra

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

couple of issues with the printing but its fine

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

chess set

print here print there

Minimalist chess pieces

Áron Pozsár

259

171

Armsiger Knight

growlinglcoud59

Chess Pieces V2

kevr102