Project: Dama de la escalera.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.61x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Brown Transmission Distance: 2
PLA PolyLite Pro Metallic Gold Transmission Distance: 2
PLA PolyLite White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Brown
At layer #15 (1.28mm) swap to Metallic Gold
At layer #20 (1.68mm) swap to White for the rest.