Super Smooth PTFE Splitter

CloseEnoughMachineShop
3D Printer>3D Printer Parts
Copyright Claim

Super Smooth PTFE Splitter

CloseEnoughMachineShop
Boost
52
117
15

Print Profile(1)

All
A1
P1S
P1P
X1 Carbon
X1E
X1
A1 mini
0.08mm layer, 5 walls, 15% infill
0.08mm layer, 5 walls, 15% infill
Designer
3.7 h
1 plate
4.8(12)
Open in Bambu Studio
Boost
52
117
15
10
160
87
Released

Description

A super smooth PC4-M6 PTFE Y-splitter

 

Super important!

You need to buy PC4-M6 with PTFE pass through! Like this: https://www.aliexpress.com/item/32815027413.html

Normal PC4-M6 will not work!

 

  • Remember to print it standing like a Y, but up-side-down.
  • Use normal support on build plate only!
  • Print in 0.08 layer height, otherwise threads may not work.
  • Print in glossy PETG for low friction.

Boost Me (for free)

Thanks for the support!

PTFE
splitter
ysplitter
pc4
pc4m6
m6
ams
bambu
lab
lite
bowden
a1
a1 mini

Comment & Rating (15)

Please fill in your opinion
(0/5000)
@user_1639070630
Boosted
Print Profile
0.08mm layer, 5 walls, 15% infill
The texture is excellent
Show original
0
Reply
@lalomunoz
Worked exceptionally well. I printed in PETG with .2mm nozzle instead a .12 layer. The PC4-M6 screwed on without any effort and the transition through the channels was smooth. Thank you for creating this and sharing with the community.
The designer has replied
1
Reply
@CEMS
Ohh! Thanks!!! 😊
0
Reply
@ivoryvoodoo
Print Profile
0.08mm layer, 5 walls, 15% infill
very smooth
1
Reply
@user_723750236
Print Profile
0.08mm layer, 5 walls, 15% infill
top
0
Reply
@AntiqueCars_CGG
I find that the holes for the PC4-M6 are too shallow, the neck of the PC4-M6 thread is 5ish mm long, and the holes are 3ish. Can't Screw the PC4-M6 all the way, as I want it to be more compact. I did cut off the length I needed and pasted a piece at each end matching the threads, in the slicer itself. I also increased the size of the model by 0.50%, as initially the threads needed to be tapped with a m6 tap to fit the PC4-M6. Maybe printing in PLA is not ok with this model, but that is what I got atm. I will see how it turns out and post an update.
0
Reply
@henisa24
Print Profile
0.08mm layer, 5 walls, 15% infill
Good print, only bottom holes we a bit of pain to clear. But is works fine after cleanin.
0
Reply
@bobkale4150
Print Profile
0.08mm layer, 5 walls, 15% infill
Easy, clean print
0
Reply
@user_4119154400
Print Profile
0.08mm layer, 5 walls, 15% infill
1
Reply
@user_3065176182
Print Profile
0.08mm layer, 5 walls, 15% infill
1
Reply
@user_576304669
Print Profile
0.08mm layer, 5 walls, 15% infill
0
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

PTFE Y-Splitter

PTFE Y-Splitter

SHaDoW6
0
3
5
Gridfinity bins with dividers

Gridfinity bins with dividers

Olov
3
68
106
1/64 5000Bu Smooth Wall Grain Bin

1/64 5000Bu Smooth Wall Grain Bin

kevinpederson
1
15
17
"Smooth Viking" beard brush holder

"Smooth Viking" beard brush holder

bamboo-roti
0
1
0
PrivacyTermsGuidelinesFAQCookie SettingsHot Searches
© 2025 MakerWorld