Dummy13 x HALO Masterchief Remixed by daokouxiaxingzou

Remixed by

daokouxiaxingzou

Toys & Games>Characters

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.16mm layer, 2 walls, 15% infill

Designer

3 h

2 plates

4.8(99)

PLA Armor + PETG Skeleton w/Multi-Color Helmet

4.7 h

3 plates

4.8(20)

Open in Bambu Studio

Boost

893

1647

217

196

2.1 k

1.1 k

Released

Description

2024/8/30 Update:

New arm parts. Compared to the original Dummy13 arms , the new arms are stronger and have a style that is consistent with other parts of the body.

Introduction:

A remix of DUMMY 13 printable joint doll (beta file) and Masterchief from Halo.
The arms and most of the frames are from the original Dummy13, with remix of the head, neck, chest, abdomen, hips, shoulders, legs, and feet, as well as the chest and neck frames. The print configuration includes the remix components mentioned above. But it does not include the original Dummy13 components. You can download and print them from the original author's page.

Boost Me (for free)

Have fun!
Boost me if you like it!

Some other stuffs I made:

Vortex launchable rocket - MakerWorld

Dummy 13 x Ultraman - MakerWorld

Dummy 13 x Ultraman Tiga - MakerWorld

Dummy 13 x Ultraman Zero - MakerWorld

Dummy 13 x Ultraman Zero

Dummy 13 x Ultraman Leo - MakerWorld

P1S Lead Screw Shields - MakerWorld

Comment & Rating (217)

@Lazy_Lu

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

awesome design! I made a seperate visor piece to save some filament.

@rodneydcroft

could you share the file for the visor possibly?

@user_2259238259

Replying to @rodneydcroft :

yes ill appreciate it to

@Mr.Ferbie

Could you share the helmet file with the separate visor? Thank you!

@Badfish

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Great design, now I just need some Guns 👍🏻😂

@Nerftaken

I made some

@user_3913378886

it's "I need a weapon" ya dingus :3

@KingElk71

Boosted

printed great. printed armor in petg 😎

@othniel517

Boosted

How did you decide to smooth your layer lines on the armor? Sanding?

@KingElk71

Boosted

Replying to @othniel517 :

No sanding, just the way I printed. I used Elegoo rapid PETG. And all the colors print that way . Also printed at 150%

(Edited)

@Rapula

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Everything was perfect, thank you! :)

@me_eatbrick

Boosted

true 🍯🫘🥜🍩🍪🌰🍿🍫🍬🎂🍮🍭🍰🧁🥧🍧🍨🍦🍡🍢🥮🍘🍥🥠🍚🍙🍤🍱🥟🦪🍲🍛🍣🍜🍝🥘🫕🥫🥗🫔🌯🥙🧆🌮🥪🫓🍕🌭🍔🍟🦴🍖🍗🧇🥓🥩🥞🧈🍳🥨🥯🥐🥖

@Cyuber

Print Profile

0.16mm layer, 2 walls, 15% infill

turned out pretty good! Active camo MC! have to reprint for the abdomen part, not sure why it didn't print

@me_eatbrick

Boosted

how!?

@Cyuber

used tpu blue for skeleton and bambu translucent PETG for armor.

@Ghost_creator

Boosted

Fits perfectly

@user_1735026499

Print Profile

0.16mm layer, 2 walls, 15% infill

Amazing for display but not very good for playing!

@Blackleaf

Great design! I did one set of armour with PLA Glow and it looked great in the dark - will make an awesome gift. Fits well with the Covenant Ghost model also.

@RemedyX

fun little build, nothing unexpected.

@GiveMeMyKidsBak

Boosted

Print Profile

PLA Armor + PETG Skeleton w/Multi-Color Helmet

looks amazing thanks

This remix is based on

DUMMY 13 Printable Jointed Figure (beta files)

Lucky 13 Toys

Masterchief from Halo

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

984

Print Profile(2)

Description

Comment & Rating (217)

This remix is based on

License

Related Models

Halo Keychain

Dummy13 X HeavyAssault StormTrooper

halo infinite scorpion low res

Dummy13 X StormTrooper