I could not find any enclosure that would work with the DAC2 from Hifiberry for the raspberry pi 3. So I took the closest model from Stamos and modified it so it would have an additional opening for the (TOS?) port.

It works quite well, fits nicely.

Not sure if anyone else would need this exact combo but I thought I share it anyway.

Intructions on how to fit it:

• Remove the nylon screws from your shield/raspi
• Put the board with shield into the enclosure with the side opposite of the USB-A ports first
• Screw down the board with the nylon screws from the bottom of the board (make sure you cleaned up the screw holes before)
• Add the little RCA shield for the two ports
• Add the lid