Diamond Painting Tray / Schiffchen

Diamond Painting Tray / Schiffchen

Boost
42
80
17

Print Profile(2)

All
X1 Carbon
P1S
P1P
X1
X1E
A1
A1 mini

0.12mm layer, 3 walls, 25% infill
0.12mm layer, 3 walls, 25% infill
Designer
3.4 h
1 plate
5.0(7)

0.2mm layer, 3 walls, 25% infill
0.2mm layer, 3 walls, 25% infill
Designer
1 h
1 plate
5.0(5)

Open in Bambu Studio
Boost
42
80
17
10
140
77
Released

Description

UPDATE: I added the same boat, the only difference is that it has the spout in the TikTak can shape so you don't need a funnel after painting.

It doesn't have a stopper but the lid fits just the same.

If you need a stopper for it, let me know and I'll make one for it too.

 

I made several boats for my wife, this is the last of them and according to my wife the best she has had so far.
Decide for yourself.

Have fun with it

You can use 5x1 magnets if you only want to use the boat, of course you don't need any magnets.

 

Info: We recommend printing the boat with a rough heat plate like a textured PEI plate so that you can shake the boat well on the table top.

 

UPDATE: Ich habe noch das selbe Schiffchenhinzugefügt der einzige Unterschied ist das er den Ausguss in der TikTak Dosen Form ist somit braucht man keinen Trichter nach dem Painten.

Es hat keinen Stopfen aber der Deckel Passt genau so.

Solltet ihr dafür einen Stopfen brauchen schreibt es mir dann mach ich dafür auch noch einen.

 

Habe für meine Frau mehrere Schiffchen gebastelt das ist das letzte davon und laut meiner Frau das Beste das sie bis jetzt hatte.
Entscheidet selber.

Viel Spaß damit

Ihr könnt 5x1 Magneten verwenden wollt ihr nur das Schiffchen nutzen braucht ihr natürlich keine Magneten.

Info: Wir empfehlen das Schiffchen mit einer Rauen Heat Plate wie eine Textured PEI Platte zu Drucken damit man das Schiffchen gut auf der Tisch Platte schütteln kann.

Comment & Rating (17)

Please fill in your opinion
(0/5000)

Print Profile
0.12mm layer, 3 walls, 25% infill
Prints absolutely perfect!
1
Reply
Print Profile
0.2mm layer, 3 walls, 25% infill
Printed very well! Nice large capacity even though I usually use smaller trays. Straightens drills nicely. Only thing I noticed is when dumping drills back into container you have to be careful so the spout doesn't clog. A little shaking did the trick!
The designer has replied
1
Reply
Hi, you printed the boat for the TikTak cans, right? If so, unfortunately nothing can be done about it because the spout has to fit into the small can. Thanks for the great review. If you have an idea for improvement let me know and I'll see what I can do.
0
Reply
Replying to @0lli :
I did not! I have round canisters. However of all the diamond art trays that I've printed, yours and one other are the only two that function well! very happy I found your file!
1
Reply
Replying to @user_405223233 :
I'm happy if you like it! have fun with it. Thank you Greetings 0lli
0
Reply
Wife loved it
The designer has replied
1
Reply
That pleases me 👍
0
Reply
Print Profile
0.2mm layer, 3 walls, 25% infill
Alles super
1
Reply
Print Profile
0.12mm layer, 3 walls, 25% infill
turned out great! I did have to make a change because the magnets I had were 5x2 so I had the make the holes deep enough for the thicker magnets but the model itself was perfect 👌
1
Reply
Boosted
Print Profile
0.12mm layer, 3 walls, 25% infill
1
Reply
Print Profile
0.12mm layer, 3 walls, 25% infill
1
Reply
Print Profile
0.2mm layer, 3 walls, 25% infill
1
Reply
Print Profile
0.2mm layer, 3 walls, 25% infill
1
Reply
Print Profile
0.12mm layer, 3 walls, 25% infill
1
Reply