Cheesy Key Clikker by FlexiPals Toy ShopMakerWorld: Download Free 3D Models

FlexiPals Toy Shop

Toys & Games>Other Toys & Games

IP Report

Print Profile(5)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

0.16mm layer, 2 walls, 15% infill

Designer

29 min

1 plate

4.8(242)

PLA 0.16mm

25 min

1 plate

4.7(10)

0.2mm layer, 2 walls, 15% infill

25 min

1 plate

4.6(8)

Cheesy key cap for Cherry MX switches

15 min

1 plate

5.0(5)

Click to see more

Open in Bambu Studio

Boost

1273

2218

307

201

3.5 k

2.4 k

Released

Description

UPDATE:

New style of key connector which should allow for more compatibility across key switches
Removed logo from bottom shell
Check out our latest upload, the Key Clikker Ball! Prints in 45 minutes and uses less than 30g of filament!

Check out our PATREON for more exclusive models!

Like this model? Consider a boost or using our affiliate links below for keyboard switches!

Boost Me (for free)

Help support future fidget models!

A clicky, satisfying, Cheesy Key Clikker!! This fun fidget toy can be easily printed in ~25 minutes, has a loop for attaching a keychain / lanyard, and requires one, standard mechanical keyboard gateron-style switch! These are one of our top sellers, and we decided to make it available for FREE!

Tested and prints great on the X1 Series, P1 Series, and A1 Mini printers.

Need some help shopping for parts? The following links* are what we use and prefer!

Blue (clicky) Keyboard switches: Here

Green (clicky-est) Keyboard switches: Here

Keychains: Here

Filament: Here

Prints may be used for commercial purposes. Attribution is appreciated. STL files may NOT be redistributed or sold EVER.

*Affiliate links may result in me receiving a small commission, allowing the creation of more fun models.

Comment & Rating (307)

@TheBlackfish

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

I modified the original cheesy key cap for a better fit with Cherry MX switches.

The profile uploader has replied

@teamsmith3d

Boosted

Thanks for sharing your modification! I just bought a bunch of the Cherry MX switches on a deal, but had never made a clicker. You came in clutch. 👊🏼

@FlexiPalsToySho

@TheBlackfish thanks! just updated the cap to better support various switches.

@jaychen323

Print Profile

0.16mm layer, 2 walls, 15% infill

nice！

The profile uploader has replied

@FlexiPalsToySho

Beautiful! Glad you like it!

@Mulvy13

Print Profile

0.16mm layer, 2 walls, 15% infill

cant rate it 5 starts because I put my plate on wrong but it turned it perfectly and would have rated it 5 stars if I could

@user_3269514419

Why would you give a lower rating for your own failure? That makes no sense.

@Ganti

@MatthewGreenfie

Print Profile

0.16mm layer, 2 walls, 15% infill

Had to tweak it slightly to fit the key switches I own, which I realize are not actually cherry ones I found out? (Note how the left one in the image wold not fit well inside the white key switch thing compared to the fit on the right) Works perfectly after that tweak!

@johndez82

what tweak did you make because I also have the key type like you and mine wouldn't fit

@MatthewGreenfie

Replying to @johndez82 :

I added two "Negative Part" cubes on the edges of the connecting segment to make it not print the edges of them, not quite as strong but they were thick enough to work for my own use at least. I don't know if it counts too much as a modification to put up as a profile, or if that's breaking the creator's rules.

@Chriuus

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

my kids love these little clickers. they fit the Gateron switches on amazon snugly. I tried printing in silk first, but the fit was a little too snug for the brittle silk pla. they look great and work great in yellow pla. Good job!