The spill proof everywhere desiccant (silica) box. by RyeBread

RyeBread

3D Printer>3D Printer Accessories

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.16mm layer, 2 walls, 15% infill

Designer

1.5 h

1 plate

4.8(18)

Open in Bambu Studio

Boost

106

169

Released

Description

The box will hold silica beads 2mm and above.

Simple screw top box intended to placed between roles of spool, either within the spool, under the spool or in a sealed container with the spool.

It can also be used in a safe or cupboard.

Bill of Materials

Bambu Filaments

Charcoal

A01-K1-1.75-1000-SPLFREE

× 1

Ivory White

A01-W2-1.75-1000-SPLFREE

× 1

Buy Now

Download BOM

Comment & Rating (22)

@aleknow

Print Profile

0.16mm layer, 2 walls, 15% infill

Nice design. But it can be tricky to open the lid without spilling desiccant, as there's no handle or grove to pull up the lid. Top ribs could be enforced a bit with maybe some cross rib, as currently dessicant may leave the box if you flex those ribs a bit.

@RonnieBLovelee

Print Profile

0.16mm layer, 2 walls, 15% infill

Cool Design...Thank you.

@user_3496131072

Print Profile

0.16mm layer, 2 walls, 15% infill

Looks really good on navy blue and gold, it goes into my camera bag ;D The screw is quite tight tho, did loosen up a bit after screwing and unscrewing for a few times.

@user_34948872

Print Profile

0.16mm layer, 2 walls, 15% infill

Works exceptionally well, occupies minimal space

Show original

@MrBoardGames

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Really nice design and holds the silica gel that are 2-4mm in size. Holds quite a few beads and the screw top works well and is smooth. Printed on a X1C.

@PrismPaw

Print Profile

0.16mm layer, 2 walls, 15% infill

@Penthrox

Print Profile

0.16mm layer, 2 walls, 15% infill

Screw in centre is a little tight but it does go with some gentle persuasion.

The designer has replied

@RyeBread

I recommend screwing and unscrewing it a few times without the lid. It loosens it up. I originally had different tolerances but the screw kept on being too loose

@richxrd112

Boosted

The model fits perfectly and the silica gel balls do not fall out The only point of criticism is that the screw is a bit tight but this can be solved by screwing it in and out a few times

Show original

@user_2779548095

Print Profile

0.16mm layer, 2 walls, 15% infill

Printed great, works well holding the silica beads :)

@user_1749826672

Boosted

good

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.