This is inspired by the file made by MizarlT. I created the Hueforge myself from the same photo.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm and use a .4 nozzle.

The Model is 160x200mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Chrominal Penumbra Gray Transmission Distance: 8
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Beige Transmission Distance: 8

This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Penumbra Gray
At layer #16 (1.36mm) swap to Blue Gray
At layer #20 (1.68mm) swap to Beige for the rest.