Project: Mustang morning.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 2.5mm

Filaments Used:
PLA Smart Recycled Black Transmission Distance: 0.5
PLA Smart Recycled Dark Blue Transmission Distance: 0.5
PLA PolyLite Pro Orange Transmission Distance: 7.5
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Dark Blue
At layer #15 (1.28mm) swap to Orange
At layer #27 (2.24mm) swap to White for the rest.