Hanging Hat Rack by Ragnor

Ragnor

Fashion>Clothes

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 3 walls, 25% infill

Designer

2.4 h

1 plate

4.6(22)

Open in Bambu Studio

Boost

117

248

398

289

Released

Description

A basic hook style hanger to be used with hanging your hats, clothes or anything that you want stacked behind your door. These are designed to chain link multiple hooks using a dovetail splice. They are slightly angled to make for a tighter connection which also means that there is only one way to snap them together.

NOTE: Even though they should be fairly tight I would highly suggest a drop of glue to keep them fastened.

These do need supports for the dovetail fasteners but should be fairly easy to remove

Comment & Rating (28)

@user_1114169854

Print Profile

0.2mm layer, 3 walls, 25% infill

Exceptionally useful, I added a latch, enhancing stability without compromising removability

Show original

@nmae826

can you share your latch?

@user_1114169854

Replying to @nmae826 :

I apologize, but due to the author's copyright, I am unable to share this derivative work I look forward to the author's subsequent additions

Show original

@user_2521125716

Print Profile

0.2mm layer, 3 walls, 25% infill

it is very good, just wish the interlocking mechanism was a bit better because specially the triangular ends do not print right and some pieces do not interlock at all as shown in the picture, all and all a great customizable design

@missile150

Easy print and it fit together well. I used ABS.

The designer has replied

@Ragnor

Thanks! If you have any issues a day of glue on each connection works great.

@Caitlin_

Print Profile

0.2mm layer, 3 walls, 25% infill

This fit perfectly over our door! I would suggest further spacing between the hooks. Some of the hats had trouble staying up if all the hooks were in use.

@theloniousfunk

Print Profile

0.2mm layer, 3 walls, 25% infill

@nopainnogame

Print Profile

0.2mm layer, 3 walls, 25% infill

@LoverBoy102824

Print Profile

0.2mm layer, 3 walls, 25% infill

totally Wirth 5 stars but every time I try to print the middle piece it doesn't print the ends the way they should be

@kantiszak

Print Profile

0.2mm layer, 3 walls, 25% infill

Decent print and does its job. Supports did break off the corner on one tip of each trapezoid type shape.

@TPGIT

Boosted

Fantastic. Works great for my hats. Wish there were a few profiles pre-made for different lengths.

@user_1364257153

Print Profile

0.2mm layer, 3 walls, 25% infill

Minor defect. for PLA. Thanks

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Door Hat Rack

Tjonesy

Skull Hat Stand

Barracks Builder

387

239

10" Server Rack

WallyFab

10-inch 4U Rack MK1

Scorch1262