Mech Arm for Tablets Remixed by Dadikonna

Remixed by

Dadikonna

Tools>Gadgets

IP Report

Print Profile(3)

All

P1P

P1S

X1 Carbon

X1E

H2D

A1 mini

0.2mm layer, 3 walls, 15% infill

Designer

9.6 h

4 plates

4.8(62)

0.2mm layer, 3 walls, 15% infill (Tablet holder 5cm longer)

1.3 h

1 plate

5.0(4)

A1 - Mini version - 0.2mm layer, 3 walls, 15% infill

10.8 h

4 plates

4.5(2)

Open in Bambu Studio

Boost

358

825

119

131

1.1 k

545

Released

Description

3D printed Mech-arm.

Used for hanging different Tablets and phones (vertical posed).

Weight test up to 800g passed!
Inspired by @FukyArt and his model https://www.printables.com/model/647794-flexible-sturdy-phone-arm-100-printed

Boost Me (for free)

Boost Tokens: Fuel the fire of 3D creativity. Reward designers, inspire innovation.

New Tablet holder designed for Mech Arm holding system.

New Improvements:

up to 240mm work place.
stronger and more durable structure.
new design of top holder element.
https://makerworld.com/en/models/735809#profileId-667803

It is a TPU sock to block the tablet in place and makes the hook very safe. From @Danila https://makerworld.com/en/@NetYaroze87
https://makerworld.com/en/models/654600#profileId-581562

Additional screw and nuts here:
https://makerworld.com/en/models/518782#profileId-448337

Model for holding Ring-lamp here:
https://makerworld.com/en/models/538669#profileId-455857

Mech Arm Wallmount

https://makerworld.com/en/models/615851#profileId-539295

Mech Arm Tripod
https://makerworld.com/en/models/586445#profileId-507674

Cable holders for Merch-arm system.

https://makerworld.com/en/models/793036#profileId-731704

Comment & Rating (119)

@NetYaroze87

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

It works perfectly with my samsung galaxy tab s9 fe. Thanks for this remix, it was exactly what I needed 😊

@NetYaroze87

Boosted

@user_3438856037 I noticed two additional issues that I wanted to point out: 1. The "tablet holder" is thin, in my opinion it should be made a little thicker and consequently also adapt the "tablet holder top" 2. The "tablet holder" should have two supports for the tablet in tpu socks. This is because the tablet without the cover is wobbly and does not lock in place by sliding. I had to create the tpu socks that I will be happy to publish here on makerworld. If it's okay with you, you can insert the link to my project here on this page, I will be happy to reference this project on my project page. I also enter photos of the supports I created.

@user_3438856037

Replying to @NetYaroze87 :

Thank you for the detailed feedback and boost. I plan to improve not only the tablet holder in the future, but also other elements. I will try to take your recommendations into account.

@NetYaroze87

Boosted

Replying to @user_3438856037 :

tpu socks published! https://makerworld.com/en/models/654600#profileId-581562

@user_2223771882

Boosted

Oops, after tightening it came loose 😅 It's brilliant overall, but tighten it just a little too much and the screw breaks 🙈 I also didn't have a good feel for it 🤣

The designer has replied

Show original

@user_3438856037

no images visible (

@user_2223771882

Boosted

Replying to @user_3438856037 :

My apologies, it seems the format is not accepted here again I printed the screw again with more adhesion and I don’t tighten it so much anymore 😁

Show original

@user_3438856037

Replying to @user_2223771882 :

I see you you use small holder for big tablet. Try this one, it stronge and bigger: https://makerworld.com/en/models/735809#profileId-667803

@cody.mccoy0924

Print Profile

0.2mm layer, 3 walls, 15% infill

I was very confused on how to put together at first, but then realized I'm dumb haha. super awesome print red, white, and blue. iPad with the case weighed in 841 grams, super strong. for now only pla as I dont have tpu.

@cody.mccoy0924

for what its worth the blue is in PETG not necessary, but i didnt have any shrinkage issues and this was the only blue i had. im not sure if the pla gaskets will be or should be used, but ill keep em around.

@user_3438856037

Thanks for that feedback! Recomend your also try more stronger tablet holder https://makerworld.com/en/models/735809#profileId-667803

@tripahermann

wait I actually need help on putting it together

@JK_hunting

Print Profile

0.2mm layer, 3 walls, 15% infill

This is my third attempt at printing it, each time with errors.

Support Issue:Can't bond to the plate, makes errors when certain parts of the element are being made.

@user_3438856037

Try original profile, there are another tipe of supports

@user_3438856037

Or try another version of holder, it compartable with this model https://makerworld.com/en/models/735809-strong-tablet-holder-mech-arm-system#profileId-667803

@berryvandenbroe

Print Profile

0.2mm layer, 3 walls, 15% infill

Very nice and handy design. Thanks for sharing

@user_3438856037

Thanks for the rate!

@Tinwar0

Print Profile

0.2mm layer, 3 walls, 15% infill

Gracias!

@user_3438856037

Thank you for feedback!

@Jo_Shwayn

Boosted

nice design, more than sturdy. I didn't print tpu parts, since I had fitting plastic washers and some adhesive rubber strips to keep the tablet in place.