Sherman M4A3E8 FURY medium World War 2 tank by mikolaj.mazik

mikolaj.mazik

Education>Engineering

Print Profile(5)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

A1 mini

Designer

24.7 h

6 plates

4.8(5)

P1S A1 X1C P1P

Designer

21.4 h

4 plates

3.8(12)

Merged body to avoid seam and shrinkage, support required

15.8 h

5 plates

4.8(5)

A1mini Merged body to avoid seam, support required

15.5 h

5 plates

5.0(1)

Click to see more

Open in Bambu Studio

Boost

376

576

663

102

Released

Description

I'm a student. If you like my work, please consider leaving a small donation, it will help me create more and more interesting models!

https://ko-fi.com/mikolajmazik

I would like to introduce you to my newest model, an American medium tank. My main goal was to make the tracks and tower movable, just like in a real machine. we were able to do it. When assembling the model, you need to use glue in two places, the rest of the connections are press-fit. When assembling the tracks, you should attach one link to the other by first inserting one side and then, by bending the plastics, attach the other side. The first layers of tracks should be printed at speed 0.5. The track plate was printed from filament: https://eu.store.bambulab.com/en-pl/products/pla-basic-filament?variant=46892984828252

and the rest of this:

https://eu.store.bambulab.com/en-pl/products/pla-matte-filament?variant=46642351800668

Comment & Rating (53)

@PolyMesh

Boosted

Print Profile

P1S A1 X1C P1P

Great Model ! Superb accuracy. I defnitely appreciate the Press-fit for all the suspension parts and the gun mantlet. It is an improvement compared to your other design such as the Tiger where we needed to glue everything. However, I had issues with the tracks. They are more difficult to assemble and you can see in the picture that they suffer from shrinkage. I used the same setting and filament that when I printed your Tiger. The Tiger tracks were flawless. Missing layer on turret, please fix!

@fakero

Boosted

Had the same issue with the poor finish on the turret part. Seems like an issue with the model as I cannot add supports here.

@Vasyl_Wolf

Boosted

Disabling the shade smooth option in the 3D model can help solve the problem with the curvature of the plane. To use the shade smooth and the surface does not bend, it is necessary to add edges to the corners of the 3D model for rigidity. Overall, the model is super. ____________________________________________________________________________________________ Отключение опции shade smooth в 3D-модели может помочь решить проблему с кривизной плоскости. Чтобы использовать shade smooth и поверхность не прогибалась, необходимо добавить дополнительные ребра по углам 3D-модели для жесткости.

(Edited)

@jekelskaz

Boosted

Excellent model. Thanks!

@user_3320108230

What filament did you use?

@PolyMesh

Boosted

Please include better assembly instructions, keep it up you have great design skills !

@SlawomirKleczar

Boosted

Print with filament PLA Smartfil from PRINTME - company from Poland - its very bad - im wait for filament from Rosa3D - tracks print from fiberlogy filament its no possible connect :(. There time - other profiles - last one photos - last print nod bad look.

@MichalS

Print Profile

Merged body to avoid seam and shrinkage, support required

luxus

@Novisek

Boosted

Print Profile

P1S A1 X1C P1P

A very nice model.

Show original

@otamwywy

can you do a hetzer please?

@alexb240303

I'm currently printing this model, but the biggest issue I'm seeing from others (and this was consistent for the tiger model too) was the treads. Looking at the model, I think they'd benefit a lot if the "hollow" sections of the tread where the press-fit 'male' nubs fits into the 'female' cylindrical hole (for lack of better jargon) were more solid. The hole for the nubs to fit into goes straight through the width of the entire tread when it really only needs to have the outer edges be hollow for the press fit. I hope I'm making sense here. other than that you're models are freaking beautiful and I'm glad to have the Easy-8 on display. You're an insanely great modeler but do try to consider how your designs will be manufactured while modelling. All the love from the US though <3. I'll add pics when I'm done printing

@human

Boosted

can you make a M48 Patton

@user_3485008406

CAN YOU PLEASE MAKE A BRENTLAY ARMORED VEHICLE MODEL THANK YOU

@user_3331332526

Print Profile

A1 mini

looks sick

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.